Audi. Saturday , November 04th , 2017 - 12:42:35 PM
The chain drive uses a new concept to reduce the drive power required: the crankshaft drives the balancer shaft via gears, with the shaft lying far down in the V of the cylinder banks. From here chains run to the four camshaft sprockets. These are trioval in shape, i.e. they have a slightly triangular shape, in order to compensate for peak forces. The balancer shaft rotates on roller bearings with particularly low levels of friction.
Both turbochargers of the 2.9 TFSI unit are centrally positioned inside the V of the engine and each of them supplies a single cylinder bank. The B-cycle combustion process with central direct injection represents a new level of efficiency within the RS family. In the NEDC, the V6 bi-turbo consumes just 8.7 liters of fuel per 100 kilometers (27.0 US mpg), which corresponds to 197 grams of CO2 per kilometer (317.0 g/mi). This is an efficiency gain of 17 percent over the previous model. Also beneficial for the new Audi RS5 Coupe is a drastic reduction in weight. The vehicle weighs in at 1,655 kilograms (3,648.7 lb) - 60 kilograms (132.3 lb) less than previously. A carbon roof with visible fiber structure is also available as an option.
The high-output V6 doesn’t just impress with its strong performance, but also with its high level of efficiency. In the NEDC, it consumes just 8.7 liters of fuel per 100 kilometers (27.0 US mpg), which corresponds to 197 grams CO2 per kilometer (317.0 g/mi). This means a 17 percent consumption saving compared with the previous model. A decisive factor in this is the new TFSI combustion process from Audi, which is known as the B-cycle. It has been specifically designed for the partial-load range, which is the predominant operating mode during normal use.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.