Audi. Saturday , November 04th , 2017 - 12:52:23 PM
The driver can select between the D and S modes and can use the special RS shift paddles on the steering wheel for manual gear changes. All commands are transmitted to the transmission electrically - by wire. The dynamic starting function controls starts with optimum traction. Using it, the Audi RS5 Coupe can unfold its full acceleration potential. Prerequisite: the ESC sport mode must be active and the selector lever must be in the S position.
Each of the two turbochargers on the 2.9 TFSI is assigned to a single cylinder bank and can build up a maximum of 0.95 bar charge pressure. Like with all new V6 and V8 engines from Audi, the turbochargers are installed within the 90-degree angle of the cylinder banks, and thus the exhaust side of the cylinder heads is on the inside, while the intake side is on the outside of the engine. This layout enables compact construction and short gas flow paths with minimal flow losses - the 2.9 TFSI responds extremely spontaneously to movement of the accelerator pedal.
In the classic Miller cycle, the reduced cylinder charge is detrimental to torque and power output. These aspects have been neutralized by Audi thanks to the implementation of turbocharging and the two-stage Audi valvelift system (AVS). The four camshafts of the 2.9 TFSI can each be adjusted by 50 degrees crank angle. At higher load and engine speed ranges, AVS closes the inlet valve later. The opening time increases from 130 to 200 degrees crankshaft angle, while at the same time the valve lift increases from 6.0 to 10.0 millimeters (0.2 to 0.4 in). Cylinder charging also increases considerably - the 2.9 TFSI revs up powerfully and delivers an impressive output.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.