Audi. Saturday , November 04th , 2017 - 12:07:56 PM
The 2.9 TFSI was derived from the 3.0 TFSI used in the Audi S5. Because of the greater forces inside the engine, the valve lift has been shortened by 3 millimeters (0.1 in) to 86 millimeters (3.4 in). With its unchanged bore of 84 millimeters (3.3 in), the displacement is 2,894 cm3. The crankcase integrates thin-walled cylinder liners made of gray cast iron and the crankshaft main bearing has a 2-millimeter (0.08 in) larger diameter compared with the 3.0 TFSI.
The driver can select between the D and S modes and can use the special RS shift paddles on the steering wheel for manual gear changes. All commands are transmitted to the transmission electrically - by wire. The dynamic starting function controls starts with optimum traction. Using it, the Audi RS5 Coupe can unfold its full acceleration potential. Prerequisite: the ESC sport mode must be active and the selector lever must be in the S position.
From 1,900 to 5,000 rpm, the 2.9 TFSI supplies the crankshaft with an impressive 600 Nm (442.5 lb-ft) of torque, which is 170 Nm (125.4 lb-ft) more than on the previous model. With its 331 kW (450 hp) - which equates to a power ratio of 155.5 hp per liter displacement - the unit accelerates the new RS5 Coupe from zero to 100 km/h (62.1 mph) in 3.9 seconds and thus six tenths of a second faster than before. If the customer orders the RS dynamic package, Audi increases the electronically restricted top speed from 250 km/h (155.3 mph) to 280 km/h (174.0 mph).
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.