Audi. Saturday , November 04th , 2017 - 12:08:35 PM
The high-output V6 doesn’t just impress with its strong performance, but also with its high level of efficiency. In the NEDC, it consumes just 8.7 liters of fuel per 100 kilometers (27.0 US mpg), which corresponds to 197 grams CO2 per kilometer (317.0 g/mi). This means a 17 percent consumption saving compared with the previous model. A decisive factor in this is the new TFSI combustion process from Audi, which is known as the B-cycle. It has been specifically designed for the partial-load range, which is the predominant operating mode during normal use.
Each of the two turbochargers on the 2.9 TFSI is assigned to a single cylinder bank and can build up a maximum of 0.95 bar charge pressure. Like with all new V6 and V8 engines from Audi, the turbochargers are installed within the 90-degree angle of the cylinder banks, and thus the exhaust side of the cylinder heads is on the inside, while the intake side is on the outside of the engine. This layout enables compact construction and short gas flow paths with minimal flow losses - the 2.9 TFSI responds extremely spontaneously to movement of the accelerator pedal.
The axle concept of the new RS5 Coupe enables optimal absorption of longitudinal and transverse forces. A revised five-link construction is used on the front axle. At the rear, a five-link suspension replaces the trapezoidal-link suspension used on the previous model. This benefits the sporty driving characteristics and agility. It also improves comfort significantly. With the standard RS sport suspension, the new RS5 Coupe sits 7 millimeters (0.3 in) lower than the base model. Audi Sport offers the RS sport suspension plus with Dynamic Ride Control (DRC) as an alternative. It uses steel springs and three-stage adjustable dampers that are connected to one another via diagonal oil lines and a central valve. When cornering at speed, the valves regulate the oil flow in the shock absorber of the spring-deflected front wheel at the outside of the curve. They increase the support provided and reduce pitch and roll movements. They thus connect the vehicle more closely to the road and improve handling. A new damper generation with integrated control valve ensures much more noticeable spread between the individual modes of the Audi drive select system.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.