Paige Dodd. Honda. October 18th , 2017.
The Odyssey Electronic Control Unit (ECU) monitors engine functions to determine the best ignition spark timing. Two engine block-mounted acoustic detonation/knock sensors "listen" to the engine, and based on this input, the ECU can retard the ignition timing to prevent potentially damaging detonation. The engine has an ignition coil unit for each cylinder positioned within each spark plug access bore. To help improve fuel efficiency, the Odyssey Touring and Elite are equipped with Idle-Stop capability. When the system is enabled by the driver and certain operating conditions are met, the Idle-Stop system will automatically shut off the engine when the vehicle comes to a stop. The engine is automatically restarted when the driver releases the brake pedal after a stop, or if the steering wheel is turned. If the Brake Hold system is in use, the engine quickly restarts after the throttle is depressed.
The 2018 Odyssey enhanced Advanced Compatibility Engineering™ (ACE™) body structure is the second generation of Honda proprietary ACE structural design. ACE is an exclusive body design that enhances occupant protection and crash compatibility in frontal crashes. It uses a network of connected structural elements to distribute crash energy more evenly throughout the front of the vehicle, helping to reduce the forces transferred to the passenger compartment. It can help to more evenly disperse the forces transferred to other vehicles in a crash as well. ACE also helps reduce the chances that one vehicle will override or underride another, improving crash compatibility of vehicles that differ in size. ACE goes further by offering additional strength and protection in small overlap frontal collisions, which are among the most severe. Multiple material grades, including ultra-high-strength steel, are used in the Odyssey body construction to help optimize safety performance.
Despite sharing the same wheelbase and a similar height and length with the previous generation, from the side Honda new 2018 Odyssey looks longer, lower and more athletic. Front-end features - in particular, the lighting - wrap around to the body sides more emphatically. The model characteristic Z-shaped "lightning bolt" side character lines are more strongly developed, new character lines on the doors add light contrast and visual intrigue, and a new partial black-out treatment for the D-pillar lends the appearance of the Odyssey tapered roof "floating" over the cabin greenhouse.
Powering the 2018 Honda Odyssey is a 3.5-liter direct injected i-VTEC® 24-valve SOHC V6 engine with Variable Cylinder Management™ (VCM™). The new engine is common with the powerplant in the 2017 Pilot and is mated to one of two new transmissions - a 9-speed automatic (9AT), also introduced in the Pilot, for LX, EX, EX-L and EX-L NR trims, and an all-new minivan and front wheel drive-first 10-speed automatic (10AT) for Touring and Elite models. For the first time ever, all Odyssey models are equipped with steering wheel mounted paddle shifters, to give drivers greater control over transmission operation, which is particularly useful in mountainous driving or when towing. Models equipped with the new 10AT also have a new Idle-Stop capability, which further enhances fuel efficiency.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.