Mollie Slater. Honda. October 19th , 2017.
The 2018 Honda Odyssey 3.5-liter V6 engine meets the tough EPA Interim Tier 3/Bin 125 and CARB LEV3/ULEV-125 emissions standards, and is certified to this level of emissions performance for 150,000 miles. Numerous advanced technologies are factors in the emissions performance. The unique cylinder head-mounted close-coupled catalytic converters light off quickly after engine start up, and a 32-bit RISC microprocessor within the Electronic Control Unit (ECU) boosts computing power to improve the precision of spark and fuel delivery. The engine features Programmed Fuel Injection (PGM-FI) that continually adjusts the fuel delivery to yield the best combination of power, low fuel consumption and low emissions. Multiple sensors constantly monitor critical engine operating parameters such as intake air temperature, ambient air pressure, throttle position, intake airflow volume, intake manifold pressure, coolant temperature, exhaust-to-air ratios, as well as the position of the crankshaft and the camshafts.
For the first time, the new 2018 Odyssey has 1500-megapascal (MPa) ultra-high-strength steel door reinforcement beams and ultra-high-strength front door outer stiffener rings made of 1500-MPa hot-stamped steel. Laser welded and significantly stronger than ordinary steel, the ultra-high-strength steel reinforcements are designed to help better protect occupants in a frontal or side impact. Their increased strength allows the components to be made lighter which also helps reduce overall vehicle weight for improved fuel efficiency.
Compared to conventional halogen headlights, the Odyssey available LED headlights offer some 32.8 feet (10 meters) wider illuminated area on each side - as well as a 26.2 foot (8 meter) longer reach line - when low beams are in use. The width and reach advantages aid drivers in more safely and confidently navigate both straight and winding roads. Odyssey auto-high beam feature further improves safety. All 2018 Odyssey trims feature LED taillights, whose C-shaped design complements the wing-shaped design of the available front LED DRLs and providing a distinctive Odyssey appearance that is easy to spot on the road. The Odyssey EX-L, Touring and Elite trims feature a power tilting and sliding front moonroof with a manual sunshade. To tilt or slide the moonroof, the driver or front passenger needs only to fully press the ceiling-mounted switch once (instead of pressing and holding it for several seconds). The moonroof fully opens or closes automatically. However, if the operator wishes to only partially open or close the moonroof (such as to achieve partial ventilation), a lighter touch yields fully manual control. The moonroof can also tilt to provide ventilation. An auto-reverse feature is built in, helping to mitigate the possibility of a pinched finger or limb. If the moonroof motor ECU detects a threshold level of mechanical resistance, indicating a possible obstruction, the motor will automatically reverse and reopen the moonroof.
Acoustic laminated windshield glass helps reduce noise entering the cabin on EX-L and above trims. Tuned specifically to attenuate wind-, urban- and traffic-noise frequencies, the acoustic windshield uses an outer layer of 2.0 mm safety glass, a 0.7 mm thick middle layer of acoustic polyvinyl butyral (PVB) and a 2.0 mm inner layer for a total thickness of 4.7 mm - an increase over the 4.5mm thickness of the previous-generation Honda Odyssey windshield. This helps the Odyssey place at the top of its class in wind-noise performance.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.