Audi. Friday , October 13th , 2017 - 19:15:47 PM
Drivers can create their own personal driving experience using the standard dynamic handling system. Audi drive select influences the characteristics of both the engine and the steering. What’s more, the system also adapts the characteristic curve for shifting, as well as the exhaust flaps and further optional modules to suit the four modes: auto, comfort, dynamic and individual.
The driver can select between the D and S modes and can use the special RS shift paddles on the steering wheel for manual gear changes. All commands are transmitted to the transmission electrically - by wire. The dynamic starting function controls starts with optimum traction. Using it, the Audi RS5 Coupe can unfold its full acceleration potential. Prerequisite: the ESC sport mode must be active and the selector lever must be in the S position.
In the classic Miller cycle, the reduced cylinder charge is detrimental to torque and power output. These aspects have been neutralized by Audi thanks to the implementation of turbocharging and the two-stage Audi valvelift system (AVS). The four camshafts of the 2.9 TFSI can each be adjusted by 50 degrees crank angle. At higher load and engine speed ranges, AVS closes the inlet valve later. The opening time increases from 130 to 200 degrees crankshaft angle, while at the same time the valve lift increases from 6.0 to 10.0 millimeters (0.2 to 0.4 in). Cylinder charging also increases considerably - the 2.9 TFSI revs up powerfully and delivers an impressive output.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.