Audi. Saturday , November 04th , 2017 - 15:38:31 PM
An important component of the B-cycle combustion process is the central position of the injectors in the combustion chamber. In the area around the inlet valve, this makes possible a geometry which, in interaction with the inlet ports, allows for targeted mixing up of the gas charge. The common-rail system injects the fuel into the combustion chamber with 250 bar of pressure - the high injection pressure ensures a homogeneous spray pattern and consequently a uniform propagation of the flame front.
The fast, spontaneously and sportily shifting eight-speed tiptronic with optimized shift times is standard on the new Audi RS5 Coupe. The layout of its gear sets and shifting elements results in low drag torques and thereby to a high efficiency level. Its large number of gears very frequently makes it possible to operate the engine close to its ideal load point. The lower gears have short, sporty ratios, while the upper gears are long in order to reduce revs and fuel consumption.
The 2.9 TFSI was derived from the 3.0 TFSI used in the Audi S5. Because of the greater forces inside the engine, the valve lift has been shortened by 3 millimeters (0.1 in) to 86 millimeters (3.4 in). With its unchanged bore of 84 millimeters (3.3 in), the displacement is 2,894 cm3. The crankcase integrates thin-walled cylinder liners made of gray cast iron and the crankshaft main bearing has a 2-millimeter (0.08 in) larger diameter compared with the 3.0 TFSI.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.