Mollie Slater. Audi. October 13th , 2017.
The designers drew inspiration for the RS5 Coupe from the distinctive racing details of the Audi 90 quattro IMSA GTO. Massive air inlets with the honeycomb structure typical of RS models characterize the front end of the car. The Singleframe radiator grille is much wider and flatter than in the base model. Next to the headlights are additional lateral air intakes and outlets; tinted bezels differentiate the optional Matrix LED headlights. quattro blisters on the flanks emphasize the pronounced bulges over the wheel arches, which have been widened by 15 millimeters (0.6 in). As standard, these house 19-inch forged aluminum wheels, with 20-inch wheels available as an option. A sporty conclusion to the vehicle is provided by the RS-specific diffuser insert, the oval tailpipes of the RS exhaust system and a surface-mounted spoiler lip. With a length of 4,723 millimeters (185.9 in), the new Audi RS5 Coupe is 74 millimeters (2.9 in) longer than the previous model.
Sporty accents on the short rear end come in the form of the RS-specific diffuser insert, the oval tailpipes of the RS exhaust system and the vertical air outlets on the outer edges of the LED rear lights. A surface-mounted spoiler lip in black, or optionally in carbon, rounds out the image.
The 2.9 TFSI was derived from the 3.0 TFSI used in the Audi S5. Because of the greater forces inside the engine, the valve lift has been shortened by 3 millimeters (0.1 in) to 86 millimeters (3.4 in). With its unchanged bore of 84 millimeters (3.3 in), the displacement is 2,894 cm3. The crankcase integrates thin-walled cylinder liners made of gray cast iron and the crankshaft main bearing has a 2-millimeter (0.08 in) larger diameter compared with the 3.0 TFSI.
Hot-formed parts form the high-strength, crash-safe backbone of the occupant cell. They reinforce the transition from the front body to the interior, the front zone of the roof frame, the B-pillars, side sills and parts of the floor. The proportion of these parts in the body structure is 17 percent. A carbon roof with visible fiber structure is also available as an option, delivering a further weight saving of 3 kilograms (6.6 lb).
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.