Libby Wade Honda, October 19th , 2017. To provide extra sound insulation by blocking off hollow pillars, acoustic spray foam is applied in 14 locations in the Odyssey body for the first time in Honda history. The areas include the base of the A-, B-, C- and D-pillars, as well as the base of the windshield frame and at the top of the C- and D-pillars. In addition, acoustic tape is applied at base of the A-, B- and C-pillars, and a foam stopper is applied to the bottom of the B-pillar. Altogether, the use of these body sealing techniques results in a 55-percent reduction in body leaks, which significantly reduces noise entering the cabin in critical sections. All foam and acoustic tape application is done while the unit-body is in its just manufactured "body-in-white" form - before attachment of key components and assemblies.
Eleanor Norton Honda, October 19th , 2017. Located behind the instrument panel, the Honda Odyssey cast magnesium steering hanger beam replaces the multi-part steel unit in the previous Odyssey. Its purpose is as a structural attachment point for the steering column and instrument panel, as well as a structural element that helps the passenger cabin retain its shape in certain collisions. For the first time, the Odyssey body structure also utilizes composite materials to further reduce weight while enhancing rigidity and noise dampening. One example is inside the C-pillars, where composite stiffeners, together with the structural foam mentioned above help improve body rigidity. Another example is the base that supports the Odyssey battery. Created from a single composite casting, it holds the battery securely while adding minimal weight to the overall body structure, saving 2.9 lbs. over the previous Odyssey.
Niamh Hart Honda, October 19th , 2017. Included on the Odyssey LX, EX, EX-L and EX-L N/R, projector-beam-style halogen headlights feature round outboard low beams and round inboard high-beam illumination. The Odyssey LX headlights have an auto-off feature to protect the battery state of charge if the driver leaves the vehicle without switching off the lights, while Odyssey EX and above trims add the convenience and safety of auto on/off high beams (AHB).
Libby Wade Honda, October 19th , 2017. New on the 2018 Honda Odyssey are center door rails hidden under the rear side glass that replace the visible rails located on the body sides behind the rear doors on the second- through 4th-generation Odyssey. The result is a clean, seamless appearance for the rear body side and no visible side door rails or components. A safety latch prevents the left-hand sliding door from opening when the fuel lid is open. Like the front doors and tailgate, the side doors feature full 360-degree seals to reduce wind and road noise, water and debris from entering the vehicle.
Paige Dodd Honda, October 19th , 2017. The new fifth-generation Odyssey is a progressive and sporty evolution of the Odyssey well-known exterior form. In front, the 2018 model includes the latest version of Honda trapezoid grille, with boldly restyled chrome bars, stylized headlights, and new wing-shaped LED daytime running lights (DRL) lending a premium appearance on EX and above models. Bright LED headlights and fog lights complete the Touring and Elite trims. The hood gains new character lines that add a more visually enticing and sophisticated look, while the front fascia invokes a sports sedan, with a large lower air inlet.
Caitlin Duncan Honda, October 19th , 2017. Based on Honda global light truck platform, the 2018 Odyssey body structure has 44-percent greater torsional rigidity than the previous model. High-strength steel comprises 58 percent of the body structure, contributing to both improved stiffness and reduced mass for the unit-body. Stiffening the body with ultra-high-strength steel, hot-stamped steel and adhesives in critical areas likewise directly contribute to reduced noise and vibration, and improved ride and handling. The structural improvements also help reduce mass, directly contributing to increased fuel efficiency.
Shannon Griffin Honda, October 19th , 2017. New on the 2018 Honda Odyssey are center door rails hidden under the rear side glass that replace the visible rails located on the body sides behind the rear doors on the second- through 4th-generation Odyssey. The result is a clean, seamless appearance for the rear body side and no visible side door rails or components. A safety latch prevents the left-hand sliding door from opening when the fuel lid is open. Like the front doors and tailgate, the side doors feature full 360-degree seals to reduce wind and road noise, water and debris from entering the vehicle.
Caitlin Duncan Honda, October 19th , 2017. Located under the front floor of the new Honda Odyssey is a variation of the "3-Bone" structure used in the Pilot that improves impact load management, directing energy around the passenger cabin in the event of a frontal collision. The structure creates three different load pathways, or "backbones," that channel collision energy. One channels collision forces from the front of the vehicle directly underneath the passenger cabin; the other two channel collision forces under the vehicle left and right side frames. The result is an improved capability to safely channel energy during a frontal crash.
Eve Fitzgerald Honda, October 19th , 2017. Unique C-shaped taillights give the Honda Odyssey a more luxurious and modern rear appearance, as does expansive chrome trim joining the taillights across the tailgate. Additional character lines visually divide the tailgate into lower, mid and upper segments, with light playing differently on each surface for more visual appeal.
Caitlin Duncan Honda, October 19th , 2017. Once the engine is fully warmed up, for maximum power and fuel efficiency fuel is injected during the intake stroke. This helps create a more homogeneous fuel/air mix in the cylinder that is aided by the high-tumble intake port design. This improves volumetric efficiency, and the cooling effect of the incoming fuel improves anti-knock performance. Every 2018 Odyssey is equipped with an ECON button that helps improve fuel efficiency by modifying throttle mapping and HVAC operation. When the system is operating, a green ECO indicator appears on the instrument panel and the Drive-by-Wire throttle system provides a more gradual response. To save additional energy, the climate control system characteristics are altered based on the conditions. A green coaching light in the instrument display gives the driver feedback to help improve their real-world fuel economy and instant or average fuel economy can be displayed.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.