Eleanor Norton BMW, 2017-11-04 19:54:30. The all-new BMW X3 M40i heralds the arrival of the first ever M Performance Automobile in this model series. Power comes from a new M Performance TwinPower Turbo 6-cylinder inline engine, which blends its insatiable appetite for revs and sublime pulling power with exemplary smoothness and efficiency. The 3.0-liter unit generates power output of 355 hp from 5,500 - 6,500 rpm. Peak torque of 369 lb-ft from 1,520 - 4,800 rpm, provide a 69 lb-ft - or 23 percent - increase (compared to the outgoing BMW X3 xDrive35i). This performance arsenal equips the all-new BMW X3 M40i to a best in segment sprint from 0 to 60 mph in 4.6 seconds and hit a top speed of 155 mph.
Libby Wade Toyota, 2017-10-18 07:14:21. Just like the Prius, the PCU is lighter and more compact as a result of integrating microcontrollers and using a new power stack structure, allowing the unit to be packaged directly above the transaxle. This new design lowers the vehicle’s overall center of mass and allows for a lower hood height. Another key change to the PCU is a revised DC-DC converter (converts a source of direct current from one voltage level to another) that sees its control output optimized. including the conversion to AC power - - helping to reduce the vehicle‘s overall power consumption. What‘s more, the output filter for the DC-DC converter has been redesigned so that it is more dimensionally compact (improved packaging/weight savings) and produces less noise (reduced NVH).
Caitlin Duncan Toyota, 2017-10-18 07:14:04. Along with the traditional Camry Hybrid system drive modes of NORMAL, ECO and EV, a new SPORT drive mode setting has been added that allows for an increase in power from the hybrid system for improved acceleration response relative to pedal input. The NORMAL, ECO, and SPORT modes can each be used while EV mode is activated. The Toyota Camry Hybrid also features the new Auto Glide Control (AGC), which helps to improve fuel efficiency by calculating an efficient coasting logic. When driving normally, engine braking will slow the vehicle down when the driver lifts off from the accelerator pedal. However, to avoid aggressive engine braking, AGC limits the loss of vehicle speed through an automatic drive setting that acts more like a neutral gear, allowing the vehicle to coast to the stoplight.
Eleanor Norton Toyota, 2017-10-18 07:11:40. Sold in more than 100 countries, the Toyota Camry is the segment leader in many global markets where it is available. Introduced in Japan in 1982, the Camry was Toyota’s first mass-produced vehicle with a transverse engine layout. Its welcomed combination of affordability with superior packaging, quality and engineering was a revolutionary concept, allowing the Camry to distinguish itself from other, notably larger American sedans that were popular at the time. One could say it was a pioneer in establishing the Midsize-sedan segment. In the following years, theCamry became a sales success everywhere it was sold. Today, Camry remains a key model in the Toyota lineup and is manufactured in multiple plants around the globe, with total sales surpassing 18 million units.
Niamh Hart Toyota, 2017-10-18 07:13:15. In fall 2016, the Toyota Tacoma will rejoin the 2017 model year TRD Pro family with all-new factory-installed off-road equipment designed by the experts at Toyota Racing Development (TRD) to make it even more off-road capable than before. Aimed squarely at extreme off-roading enthusiasts who challenge themselves and their trucks and SUV’s in some of the harshest conditions, the new 2017 Tacoma TRD Pro will raise the bar on TRD Pro performance. Courtesy of TRD, the new Tacoma TRD Pro will add an array of new performance equipment and features, making this a truly second-generation TRD Pro product, and the new benchmark for challenging off-road terrain.
Shannon Griffin Toyota, 2017-10-18 07:13:40. Building on the Camry‘s undisputed reputation as an extremely smooth and quiet car in its class, Toyota engineers incorporated a variety of new noise, vibration and harshness (NVH) countermeasures that were previously found exclusively on luxury models. These include sound absorbing/insulation through the fitment of a hood insulator and upper and lower fender separator. The passenger compartment is further insulated from the engine and road noise using foam/vibration dampening materials throughout the vehicle along with a thicker dash silencer mat across the entire interior firewall section. Furthermore, a special vibration-damping coating has been applied over a wider area of the underfloor, joined by noise-proofing material encompassing more surface area of the interior‘s ceiling. Wind noise has been suppressed through a newly-designed rain gutter molding and a reduction in the step at the bottom of the windshield.
Paige Dodd Toyota, 2017-10-18 07:14:45. Along with the traditional Camry Hybrid system drive modes of NORMAL, ECO and EV, a new SPORT drive mode setting has been added that allows for an increase in power from the hybrid system for improved acceleration response relative to pedal input. The NORMAL, ECO, and SPORT modes can each be used while EV mode is activated. The Toyota Camry Hybrid also features the new Auto Glide Control (AGC), which helps to improve fuel efficiency by calculating an efficient coasting logic. When driving normally, engine braking will slow the vehicle down when the driver lifts off from the accelerator pedal. However, to avoid aggressive engine braking, AGC limits the loss of vehicle speed through an automatic drive setting that acts more like a neutral gear, allowing the vehicle to coast to the stoplight.
Kiera Shaw Honda, 2017-10-18 23:58:17. The Odyssey new engine - from the Honda EarthDreams® Technology powertrain series - is rated at 280 peak horsepower and 262 lb.-ft. peak torque. Peak engine output is up 32 horsepower and 12 pound-feet of torque from the previous model, with increased torque over the engine entire operating (rpm) range. The new, more efficient engine and transmissions, along with as much as a 75-pound reduction in vehicle weight (EX-L trim) and improved aerodynamics, among other reductions to running resistance, result in enhanced performance and fuel efficiency. With its 60-degree V-angle, the Odyssey V6 engine is inherently smooth and has compact overall dimensions that allow efficient packaging within the vehicle. The engine has a high-pressure die-cast lightweight aluminum alloy block with cast-in-place iron cylinder liners. Made with a centrifugal spin-casting process, the thin-wall liners are high in strength and low in porosity. The block incorporates a deep-skirt design with four bolts per bearing cap for rigid crankshaft support and minimized noise and vibration. The engine also uses a high-tensile strength steel crankshaft is for minimum weight.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.