Libby Wade BMW, 2017-11-04 19:54:21. Among these features are the standard - and strikingly dynamic - M Performance-specific exterior design cues, which include the M Aerodynamic kit with design elements finished in Cerium Grey Metallic. The flap-controlled M Sport exhaust system with Black Chrome tailpipe embellishers, M Sport brakes, M Sport suspension with M Performance specific tuning, Variable sport steering and standard 19-inch or optional 20-inch and 21-inch cast light-alloy wheels provide a distinctive sporting character. The X3 M40i can be equipped with the available Adaptive M Sport suspension, which covers an even wider spread of ride comfort featuring the sportiest set-up suspension available.
Eve Fitzgerald Honda, 2017-10-19 15:02:32. Located under the front floor of the new Honda Odyssey is a variation of the "3-Bone" structure used in the Pilot that improves impact load management, directing energy around the passenger cabin in the event of a frontal collision. The structure creates three different load pathways, or "backbones," that channel collision energy. One channels collision forces from the front of the vehicle directly underneath the passenger cabin; the other two channel collision forces under the vehicle left and right side frames. The result is an improved capability to safely channel energy during a frontal crash.
Caitlin Duncan Honda, 2017-10-19 15:02:32. Wraparound chrome trim adds a luxurious touch on all trims, as do chrome door handles on EX and above trims, and body-color lower side sills on the Touring and Elite trims. Re-engineering the sliding side door mechanisms removes the previous models visible rails along the rear body sides, giving the new Odyssey a cleaner appearance, while the larger 18-inch and available 19-inch wheels and tires further bolster the 2018 Odyssey athletic stance.
Shannon Griffin Honda, 2017-10-19 15:02:32. The 2018 Odyssey receives the most thorough and intensive array of aerodynamic refinements of any Odyssey generation to date. This comprehensive approach boosts aerodynamic efficiency and reduces wind noise. Examples of the aero efforts found on the 2018 Odyssey include extensive under covers, the Active Shutter Grille system, hidden windshield wipers, wind-sculptured side mirrors (power folding on Elite), and many small but pertinent details such as under-body strakes, shark fin-type antenna, and a rear spoiler (black on LX, EX, EX-L and Touring trims, body-color on Elite).
Libby Wade Honda, 2017-10-19 15:02:31. The 2018 Odyssey enhanced Advanced Compatibility Engineering™ (ACE™) body structure is the second generation of Honda proprietary ACE structural design. ACE is an exclusive body design that enhances occupant protection and crash compatibility in frontal crashes. It uses a network of connected structural elements to distribute crash energy more evenly throughout the front of the vehicle, helping to reduce the forces transferred to the passenger compartment. It can help to more evenly disperse the forces transferred to other vehicles in a crash as well. ACE also helps reduce the chances that one vehicle will override or underride another, improving crash compatibility of vehicles that differ in size. ACE goes further by offering additional strength and protection in small overlap frontal collisions, which are among the most severe. Multiple material grades, including ultra-high-strength steel, are used in the Odyssey body construction to help optimize safety performance.
Niamh Hart Honda, 2017-10-19 15:02:32. The new Odyssey makes widespread use of structural adhesives in the unit-body, supplementing structural welds and significantly increasing rigidity without the additional mass of steel components. Structural adhesives are used at the roof edges and around the moonroof opening, in the front floor and cowl area, in the A- and B-pillars, around the front suspension upper mounts, and extensively throughout the rear of the body. Applied before the body panels are welded together, some 147.6 feet of adhesives (32.8 ft. more than in the previous Odyssey generation) account for approximately 3.5 percent of the entire unit-body stiffness.
Caitlin Duncan Honda, 2017-10-19 15:02:31. The 2018 Honda Odyssey 3.5-liter V6 engine meets the tough EPA Interim Tier 3/Bin 125 and CARB LEV3/ULEV-125 emissions standards, and is certified to this level of emissions performance for 150,000 miles. Numerous advanced technologies are factors in the emissions performance. The unique cylinder head-mounted close-coupled catalytic converters light off quickly after engine start up, and a 32-bit RISC microprocessor within the Electronic Control Unit (ECU) boosts computing power to improve the precision of spark and fuel delivery. The engine features Programmed Fuel Injection (PGM-FI) that continually adjusts the fuel delivery to yield the best combination of power, low fuel consumption and low emissions. Multiple sensors constantly monitor critical engine operating parameters such as intake air temperature, ambient air pressure, throttle position, intake airflow volume, intake manifold pressure, coolant temperature, exhaust-to-air ratios, as well as the position of the crankshaft and the camshafts.
Paige Dodd Honda, 2017-10-19 15:02:31. Multiple grades of high-strength steel are used in the Odyssey body construction to help achieve excellent overall vehicle dynamics, optimize safety performance, reduce weight, and lower noise, vibration and harshness (NVH). The combination of advanced materials and evolved engineering processes save 75 lbs. in unit-body weight compared to the previous-generation Odyssey. The 2018 Honda Odyssey features several unique advancements in body design and materials that significantly improve overall rigidity, while reducing weight. This directly helps improve overall vehicle dynamics, crash safety performance, interior quietness, and long-term durability.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.