Libby Wade BMW, 2017-11-04 19:54:21. The new BMW i3s incorporates a number of design elements all of its own that underscore its particularly dynamic character. Both the front and rear aprons are notable for their model-specific, powerfully shaped contours. At the front, the bumper inlay as well as the U-shaped surround encircling it have a black finish. The front apron‘s side sections are bordered on their lower edge by accent strips in BMW i Blue or Frozen Grey that further emphasise the width of the car. The accent in the closed BMW kidney grille is also painted in high-gloss black on the BMW i3s to give the grille a larger and more prominent appearance. The rear apron of the new BMW i3s is likewise composed of individually styled contours, while the black surround frames an extra-wide, body-coloured inlay. On the new BMW i3s, the roof line accent also sports the same high-gloss black finish as the A-pillars.
Eve Fitzgerald Honda, 2017-10-19 15:02:35. Unique C-shaped taillights give the Honda Odyssey a more luxurious and modern rear appearance, as does expansive chrome trim joining the taillights across the tailgate. Additional character lines visually divide the tailgate into lower, mid and upper segments, with light playing differently on each surface for more visual appeal.
Shannon Griffin Honda, 2017-10-19 15:02:34. Located behind the instrument panel, the Honda Odyssey cast magnesium steering hanger beam replaces the multi-part steel unit in the previous Odyssey. Its purpose is as a structural attachment point for the steering column and instrument panel, as well as a structural element that helps the passenger cabin retain its shape in certain collisions. For the first time, the Odyssey body structure also utilizes composite materials to further reduce weight while enhancing rigidity and noise dampening. One example is inside the C-pillars, where composite stiffeners, together with the structural foam mentioned above help improve body rigidity. Another example is the base that supports the Odyssey battery. Created from a single composite casting, it holds the battery securely while adding minimal weight to the overall body structure, saving 2.9 lbs. over the previous Odyssey.
Paige Dodd Honda, 2017-10-19 15:02:34. The Odyssey Electronic Control Unit (ECU) monitors engine functions to determine the best ignition spark timing. Two engine block-mounted acoustic detonation/knock sensors "listen" to the engine, and based on this input, the ECU can retard the ignition timing to prevent potentially damaging detonation. The engine has an ignition coil unit for each cylinder positioned within each spark plug access bore. To help improve fuel efficiency, the Odyssey Touring and Elite are equipped with Idle-Stop capability. When the system is enabled by the driver and certain operating conditions are met, the Idle-Stop system will automatically shut off the engine when the vehicle comes to a stop. The engine is automatically restarted when the driver releases the brake pedal after a stop, or if the steering wheel is turned. If the Brake Hold system is in use, the engine quickly restarts after the throttle is depressed.
Libby Wade Honda, 2017-10-19 15:02:34. New on the 2018 Honda Odyssey are center door rails hidden under the rear side glass that replace the visible rails located on the body sides behind the rear doors on the second- through 4th-generation Odyssey. The result is a clean, seamless appearance for the rear body side and no visible side door rails or components. A safety latch prevents the left-hand sliding door from opening when the fuel lid is open. Like the front doors and tailgate, the side doors feature full 360-degree seals to reduce wind and road noise, water and debris from entering the vehicle.
Eleanor Norton Honda, 2017-10-19 15:02:33. Compared to conventional halogen headlights, the Odyssey available LED headlights offer some 32.8 feet (10 meters) wider illuminated area on each side - as well as a 26.2 foot (8 meter) longer reach line - when low beams are in use. The width and reach advantages aid drivers in more safely and confidently navigate both straight and winding roads. Odyssey auto-high beam feature further improves safety. All 2018 Odyssey trims feature LED taillights, whose C-shaped design complements the wing-shaped design of the available front LED DRLs and providing a distinctive Odyssey appearance that is easy to spot on the road. The Odyssey EX-L, Touring and Elite trims feature a power tilting and sliding front moonroof with a manual sunshade. To tilt or slide the moonroof, the driver or front passenger needs only to fully press the ceiling-mounted switch once (instead of pressing and holding it for several seconds). The moonroof fully opens or closes automatically. However, if the operator wishes to only partially open or close the moonroof (such as to achieve partial ventilation), a lighter touch yields fully manual control. The moonroof can also tilt to provide ventilation. An auto-reverse feature is built in, helping to mitigate the possibility of a pinched finger or limb. If the moonroof motor ECU detects a threshold level of mechanical resistance, indicating a possible obstruction, the motor will automatically reverse and reopen the moonroof.
Paige Dodd Honda, 2017-10-19 15:02:34. The Odyssey new engine - from the Honda EarthDreams® Technology powertrain series - is rated at 280 peak horsepower and 262 lb.-ft. peak torque. Peak engine output is up 32 horsepower and 12 pound-feet of torque from the previous model, with increased torque over the engine entire operating (rpm) range. The new, more efficient engine and transmissions, along with as much as a 75-pound reduction in vehicle weight (EX-L trim) and improved aerodynamics, among other reductions to running resistance, result in enhanced performance and fuel efficiency. With its 60-degree V-angle, the Odyssey V6 engine is inherently smooth and has compact overall dimensions that allow efficient packaging within the vehicle. The engine has a high-pressure die-cast lightweight aluminum alloy block with cast-in-place iron cylinder liners. Made with a centrifugal spin-casting process, the thin-wall liners are high in strength and low in porosity. The block incorporates a deep-skirt design with four bolts per bearing cap for rigid crankshaft support and minimized noise and vibration. The engine also uses a high-tensile strength steel crankshaft is for minimum weight.
Caitlin Duncan Honda, 2017-10-19 15:02:33. Along with acoustic spray foam applied in 14 critical locations, all Odyssey trims feature triple door seals and Active Noise Control technology to help prevent unwanted noise from reaching the passengers. While all trims benefit from thicker front and rear door glass, Elite receives acoustic front/rear door glass and adds an additional carpet barrier layer, acoustic fabric fender liners, additional slide door insulation, and rear wheelhouse insulators.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.