Millie Lowe Audi, 2017-11-04 19:54:18. The high-output V6 doesn’t just impress with its strong performance, but also with its high level of efficiency. In the NEDC, it consumes just 8.7 liters of fuel per 100 kilometers (27.0 US mpg), which corresponds to 197 grams CO2 per kilometer (317.0 g/mi). This means a 17 percent consumption saving compared with the previous model. A decisive factor in this is the new TFSI combustion process from Audi, which is known as the B-cycle. It has been specifically designed for the partial-load range, which is the predominant operating mode during normal use.
Millie Lowe Toyota, 2017-10-17 00:59:56. The fortified body includes additional gussets for the front/rear door frame (B-pillar) that have greatly increased the frame/joint strength. Also, the front suspension tower brace embedded within the cowl body now makes use of a closed cross-section construction, further advancing the vehicle’s dynamic handling prowess and stability in the corners. At the rear of the vehicle, a new rear body frame of annular construction enhances structural rigidity, joined by additional braces added to the rear suspension that can withstand higher levels of lateral force and increase the vehicle‘s lateral rigidity.
Niamh Hart Toyota, 2017-10-17 00:59:56. Every Toyota Tacoma TRD Pro will be equipped with 4WDemand part-time 4WD with a transfer case and Automatic Limited-Slip Differential (Auto LSD) that are both electronically-controlled. Also standard will be a V6 Tow Package that includes a Class-IV towing receiver hitch, ATF cooler (automatic only), engine oil cooler, power steering cooler, 130-amp alternator, 4- and 7-pin connector with convertor, and Trailer-Sway Control (TSC). An electronically controlled locking rear differential is also standard to help distribute engine power evenly to both rear wheels so they move at the same speed, providing more grip in low-traction conditions.
Kiera Shaw Toyota, 2017-10-17 00:59:56. Despite the increased use of high-tensile-strength sheet metal and hot stamping materials resulting in a lightweight body, further weight reduction has been achieved through the fitment of an aluminum hood, while new construction techniques have led to the use of thinner body panels for the roof, hood, trunk lid, front and rear doors and front fenders when compared with the previous model. Laser Screw Welding (LSW) has been incorporated at key junctures throughout the body/platform for increased joint rigidity. A special high-rigidity urethane adhesive has been applied to both the windshield and rear window where it meets the vehicle body that helps to realize increased body rigidity.
Eleanor Norton Toyota, 2017-10-17 00:59:56. Toyota Sienna drivers will enjoy enhanced connectivity and entertainment through the new Toyota Entune™ 3.0 multimedia system on all models, offering an enhanced set of connected vehicle technologies. The Entune 3.0 system will feature navigation and App Suite Connect for everyone. The Toyota Sienna L, LE, SE and XLE grades will come standard with the Connected Navigation Scout GPS Link with Moving Maps. Sienna LE, SE, and XLE grades will come standard with the Entune Audio Plus, which includes Safety Connect, and Wi-Fi Connect. WiFi Connect will allow up to five mobile devices to connect using 4G LTE.
Niamh Hart Toyota, 2017-10-17 15:02:16. Like the new Toyota Camry’s conventional gasoline powertrain, the new Toyota Hybrid System (THS II) has been engineered to provide spirited performance and driving enjoyment-including new Sequential Shiftmatic technology that allows the driver to "shift" the continuously-variable transmission (CVT), mimicking a quick-shifting six-speed automatic transmission via paddle shifters (on SE grade) or with the console-mounted shift lever-while simultaneously achieving an optimal balance between high power output and exemplary energy efficiency. The 2018 Camry Hybrid is available in three grades, LE, SE, and XLE. In addition to its enhanced handling and driving performance, the hybrid version of the new Camry achieves outstanding fuel efficiency with a best-in-class EPA-estimated mpg of 51 city/ 53 highway/52 combined on the LE grade, an impressive 30 percent increase for combined mpg, and 44 city/47 highway/46 combined on the SE and XLE, reflecting an increase of 21 percent for combined mpg.
Caitlin Duncan Toyota, 2017-10-17 00:59:57. The new front seats have improved ergonomics, providing maximum comfort with a newfound level of ease and engagement to match the Camry’s elevated performance and athleticism. Rear-seat accommodations are more refined than ever too, with improved comfort and ergonomics. Exquisite stitching on the front- and rear-seat surfaces is but one example of the high level of craftsmanship found throughout the vehicle. Development of the all-new Camry has been advanced by Toyota‘s company-wide implementation of Toyota New Global Architecture (TNGA). TNGA builds upon Toyota‘s engineering and design strengths to make every new vehicle even better, with the all-new Toyota Camry being the first vehicle to take full advantage of the new architecture for creating fun-to-drive vehicles.
Paige Dodd Toyota, 2017-10-17 00:59:56. Despite the increased use of high-tensile-strength sheet metal and hot stamping materials resulting in a lightweight body, further weight reduction has been achieved through the fitment of an aluminum hood, while new construction techniques have led to the use of thinner body panels for the roof, hood, trunk lid, front and rear doors and front fenders when compared with the previous model. Laser Screw Welding (LSW) has been incorporated at key junctures throughout the body/platform for increased joint rigidity. A special high-rigidity urethane adhesive has been applied to both the windshield and rear window where it meets the vehicle body that helps to realize increased body rigidity.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.