Eleanor Norton Audi, 2017-11-04 19:53:50. The new Audi RS5 Coupe demonstrates its sporty character as a gran turismo at first glance. The designers drew inspiration for the car from the distinctive motorsport details of the Audi 90 quattro IMSA GTO. The front, sides and rear exhibit RS-typical differentiation. Measuring 4,723 millimeters (185.9 in) in length, the second generation of the Audi RS5 Coupe is 74 millimeters (2.9 in) longer than the predecessor model. The height is 1,360 millimeters (53.5 in) and thus 6 millimeters (0.2 in) lower than previously. At 1,861 millimeters (73.3 in), the vehicle’s width is almost the same as before.
Paige Dodd Ford Fiesta, 2017-11-04 19:54:12. The Ford Fiesta Active is the first Fiesta crossover model, combining rugged SUV-inspired styling that includes raised ride-height, roof bars and additional cladding; hatchback practicality; and true Fiesta driving dynamics. Ford earlier this year introduced for the first time a new range of ST-Line models that deliver exterior and interior styling inspired by Ford Performance models alongside powerful Ford EcoBoost petrol and TDCi diesel engines, for customers who aspire to the sporty image of Ford’s ST models - but do not require the full performance delivered by optimised ST engines and chassis with sports technologies. The Ford Fiesta ST-Line features sporty exterior styling including unique alloy wheel, grille, front and rear bumper and side-skirt designs. The interior features sports seats, alloy pedals and a flat-bottomed steering wheel, while the driving experience is enhanced with sports suspension.
Paige Dodd Honda, 2017-10-19 15:02:27. To provide extra sound insulation by blocking off hollow pillars, acoustic spray foam is applied in 14 locations in the Odyssey body for the first time in Honda history. The areas include the base of the A-, B-, C- and D-pillars, as well as the base of the windshield frame and at the top of the C- and D-pillars. In addition, acoustic tape is applied at base of the A-, B- and C-pillars, and a foam stopper is applied to the bottom of the B-pillar. Altogether, the use of these body sealing techniques results in a 55-percent reduction in body leaks, which significantly reduces noise entering the cabin in critical sections. All foam and acoustic tape application is done while the unit-body is in its just manufactured "body-in-white" form - before attachment of key components and assemblies.
Kiera Shaw Honda, 2017-10-19 15:02:27. Located behind the instrument panel, the Honda Odyssey cast magnesium steering hanger beam replaces the multi-part steel unit in the previous Odyssey. Its purpose is as a structural attachment point for the steering column and instrument panel, as well as a structural element that helps the passenger cabin retain its shape in certain collisions. For the first time, the Odyssey body structure also utilizes composite materials to further reduce weight while enhancing rigidity and noise dampening. One example is inside the C-pillars, where composite stiffeners, together with the structural foam mentioned above help improve body rigidity. Another example is the base that supports the Odyssey battery. Created from a single composite casting, it holds the battery securely while adding minimal weight to the overall body structure, saving 2.9 lbs. over the previous Odyssey.
Mollie Slater Honda, 2017-10-19 15:02:27. The Honda Odyssey Drive-by-Wire throttle system replaces a conventional throttle cable with smart electronics that "connect" the accelerator pedal to a throttle valve inside the throttle-body. The result is less under-hood clutter and lower weight, as well as quicker and more accurate throttle actuation. Plus, a tunable "gain" rate - the relationship between throttle pedal application and throttle opening - offers improved drivability and optimized engine response to suit specific driving conditions. Honda Drive-by-Wire throttle system establishes the current driving conditions by monitoring throttle pedal position, throttle valve position, engine speed (rpm) and road speed. This information is used to define the throttle control sensitivity that gives the Odyssey throttle pedal a predictable and responsive feel that meets driver expectations.
Millie Lowe Honda, 2017-10-19 15:02:28. Despite sharing the same wheelbase and a similar height and length with the previous generation, from the side Honda new 2018 Odyssey looks longer, lower and more athletic. Front-end features - in particular, the lighting - wrap around to the body sides more emphatically. The model characteristic Z-shaped "lightning bolt" side character lines are more strongly developed, new character lines on the doors add light contrast and visual intrigue, and a new partial black-out treatment for the D-pillar lends the appearance of the Odyssey tapered roof "floating" over the cabin greenhouse.
Caitlin Duncan Honda, 2017-10-19 15:02:27. Unique C-shaped taillights give the Honda Odyssey a more luxurious and modern rear appearance, as does expansive chrome trim joining the taillights across the tailgate. Additional character lines visually divide the tailgate into lower, mid and upper segments, with light playing differently on each surface for more visual appeal.
Caitlin Duncan Honda, 2017-10-19 15:02:28. Wraparound chrome trim adds a luxurious touch on all trims, as do chrome door handles on EX and above trims, and body-color lower side sills on the Touring and Elite trims. Re-engineering the sliding side door mechanisms removes the previous models visible rails along the rear body sides, giving the new Odyssey a cleaner appearance, while the larger 18-inch and available 19-inch wheels and tires further bolster the 2018 Odyssey athletic stance.
Shannon Griffin Honda, 2017-10-19 15:02:28. Like other Honda V6 powerplants, the Honda Odyssey engine 4-valve cylinder heads are a single-overhead-camshaft design, with the cams driven by the crankshaft via an automatically tensioned timing belt. Made of low-pressure die-cast, low-porosity aluminum, each cylinder head incorporates a "tumble port" design that improves combustion efficiency by creating a more homogeneous fuel-air mixture. An integrated exhaust manifold cast into each cylinder head reduces parts count, saves weight, improves flow and optimizes the location of the close-coupled catalyst on each cylinder bank for quick "light off."
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.