Paige Dodd Ford Fiesta, 2017-11-04 19:54:12. Further new-to-Fiesta features inspired by Ford‘s larger vehicles include a heated steering wheel for comfort on cold winter mornings, and a stylish new instrument cluster featuring a 4.2 inch multi-function TFT display that delivers an attractive welcome sequence on start-up. A stiffer body structure, reduced powertrain noise vibration and harshness, enhanced powertrain isolation, and an acoustic windshield contribute to a more comfortable and premium driver and passenger experience. Best-in-class levels of quietness include an interior road noise level of 29.3 sone - a metric for loudness - at 100 km/h (62 mph), a 7 per cent improvement over the outgoing Fiesta.
Eleanor Norton Audi, 2017-11-04 19:53:50. The axle concept of the new RS5 Coupe enables optimal absorption of longitudinal and transverse forces. A revised five-link construction is used on the front axle. At the rear, a five-link suspension replaces the trapezoidal-link suspension used on the previous model. This benefits the sporty driving characteristics and agility. It also improves comfort significantly. With the standard RS sport suspension, the new RS5 Coupe sits 7 millimeters (0.3 in) lower than the base model. Audi Sport offers the RS sport suspension plus with Dynamic Ride Control (DRC) as an alternative. It uses steel springs and three-stage adjustable dampers that are connected to one another via diagonal oil lines and a central valve. When cornering at speed, the valves regulate the oil flow in the shock absorber of the spring-deflected front wheel at the outside of the curve. They increase the support provided and reduce pitch and roll movements. They thus connect the vehicle more closely to the road and improve handling. A new damper generation with integrated control valve ensures much more noticeable spread between the individual modes of the Audi drive select system.
Millie Lowe Honda, 2017-10-19 15:02:30. The Odyssey new engine - from the Honda EarthDreams® Technology powertrain series - is rated at 280 peak horsepower and 262 lb.-ft. peak torque. Peak engine output is up 32 horsepower and 12 pound-feet of torque from the previous model, with increased torque over the engine entire operating (rpm) range. The new, more efficient engine and transmissions, along with as much as a 75-pound reduction in vehicle weight (EX-L trim) and improved aerodynamics, among other reductions to running resistance, result in enhanced performance and fuel efficiency. With its 60-degree V-angle, the Odyssey V6 engine is inherently smooth and has compact overall dimensions that allow efficient packaging within the vehicle. The engine has a high-pressure die-cast lightweight aluminum alloy block with cast-in-place iron cylinder liners. Made with a centrifugal spin-casting process, the thin-wall liners are high in strength and low in porosity. The block incorporates a deep-skirt design with four bolts per bearing cap for rigid crankshaft support and minimized noise and vibration. The engine also uses a high-tensile strength steel crankshaft is for minimum weight.
Niamh Hart Honda, 2017-10-19 15:02:28. Odyssey EX, EX-L, Touring and Elite trims have bright, distinctive LED Daytime Running Lights (DRL). A signature design feature of the new Odyssey, the DRLs utilize Honda characteristic wing shape positioned below and beside the low-beam headlights. Shaped to match the modern, elegant and athletic look of the new Odyssey, the LED DRL array tapers as it moves from the body side toward the inside of the headlight lens. Stylistically, the DRLs strongly and clearly define the front corners of the Odyssey.
Niamh Hart Honda, 2017-10-19 15:02:30. The 2018 Odyssey enhanced Advanced Compatibility Engineering™ (ACE™) body structure is the second generation of Honda proprietary ACE structural design. ACE is an exclusive body design that enhances occupant protection and crash compatibility in frontal crashes. It uses a network of connected structural elements to distribute crash energy more evenly throughout the front of the vehicle, helping to reduce the forces transferred to the passenger compartment. It can help to more evenly disperse the forces transferred to other vehicles in a crash as well. ACE also helps reduce the chances that one vehicle will override or underride another, improving crash compatibility of vehicles that differ in size. ACE goes further by offering additional strength and protection in small overlap frontal collisions, which are among the most severe. Multiple material grades, including ultra-high-strength steel, are used in the Odyssey body construction to help optimize safety performance.
Mollie Slater Honda, 2017-10-19 15:02:30. The Honda Odyssey new direct-injection system enables increased torque across the engine full operating range along with higher fuel efficiency. The system features a compact, high-pressure, direct-injection pump that allows both high fuel flow and pulsation suppression, while variable pressure control optimizes injector operation. A multi-hole injector delivers fuel directly into each cylinder (not to the intake port, as in the previous generation Odyssey), allowing for more efficient combustion. The multi-hole injectors can create the ideal stoichiometric fuel/air mixture in the cylinders for good emissions control. Theoretically, a stoichiometric mixture has just enough air to completely burn the available fuel. Based on the operating conditions, the direct-injection system alters its function for best performance. Upon cold engine startup, fuel is injected into the cylinders on the compression stroke. This creates a weak stratified charge effect that improves engine start-up and reduces exhaust emissions before a normal operating temperature is reached.
Mollie Slater Honda, 2017-10-19 15:02:29. In a first for Odyssey, Honda Active Shutter Grille system located below the front bumper reduces aerodynamic drag especially at cruising speeds, directly helping to improve fuel efficiency. Included on all 2018 Odyssey trims, the system uses an electric actuator controlled by a processor that tracks major temperature parameters, including engine coolant and radiator temperatures, intake air temperature, transmission oil temperature and air-conditioning requirements, all of which can vary due to weather, road conditions, vehicle speed, throttle and gear positions, and towing activity. The system either opens or closes the four shutters simultaneously to control the amount of air flowing through the engine radiator and the air conditioner condenser. The system is designed to keep the shutters closed as much as possible - even in city driving.
Mollie Slater Honda, 2017-10-19 15:02:29. Odyssey EX and above trims include power sliding side doors that can be activated by a switch (to operate left, right or both doors) on the instrument panel, by a switch from the second-row seating area, by pulling on either the interior or exterior door handle, or by buttons (left or right) on the remote key fob. The system features improved operating logic. In the previous Odyssey generation, if the driver and a passenger outside the vehicle were to each activate a power side door at approximately the same time, the door could start to open with the first person action, and then stop as soon as the second person took action. To eliminate this on the 2018 Odyssey, new door logic enables the door to operate as intended if two identical activations (such as the driver and a passenger both wishing to open a door) are entered within a half second of each other. For instance, if a parent pulls up to the curb at school and presses the power side door open button at approximately the same time as does a child waiting curbside, the door will open as desired. If longer than a half second passes between activations, door operation will stop, and a warning beep will sound.
Niamh Hart Honda, 2017-10-19 15:02:29. The new Odyssey makes widespread use of structural adhesives in the unit-body, supplementing structural welds and significantly increasing rigidity without the additional mass of steel components. Structural adhesives are used at the roof edges and around the moonroof opening, in the front floor and cowl area, in the A- and B-pillars, around the front suspension upper mounts, and extensively throughout the rear of the body. Applied before the body panels are welded together, some 147.6 feet of adhesives (32.8 ft. more than in the previous Odyssey generation) account for approximately 3.5 percent of the entire unit-body stiffness.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.