Millie Lowe Audi, 2017-11-04 19:54:18. The axle concept of the new RS5 Coupe enables optimal absorption of longitudinal and transverse forces. A revised five-link construction is used on the front axle. At the rear, a five-link suspension replaces the trapezoidal-link suspension used on the previous model. This benefits the sporty driving characteristics and agility. It also improves comfort significantly. With the standard RS sport suspension, the new RS5 Coupe sits 7 millimeters (0.3 in) lower than the base model. Audi Sport offers the RS sport suspension plus with Dynamic Ride Control (DRC) as an alternative. It uses steel springs and three-stage adjustable dampers that are connected to one another via diagonal oil lines and a central valve. When cornering at speed, the valves regulate the oil flow in the shock absorber of the spring-deflected front wheel at the outside of the curve. They increase the support provided and reduce pitch and roll movements. They thus connect the vehicle more closely to the road and improve handling. A new damper generation with integrated control valve ensures much more noticeable spread between the individual modes of the Audi drive select system.
Eve Fitzgerald Honda, 2017-10-19 15:02:32. Located under the front floor of the new Honda Odyssey is a variation of the "3-Bone" structure used in the Pilot that improves impact load management, directing energy around the passenger cabin in the event of a frontal collision. The structure creates three different load pathways, or "backbones," that channel collision energy. One channels collision forces from the front of the vehicle directly underneath the passenger cabin; the other two channel collision forces under the vehicle left and right side frames. The result is an improved capability to safely channel energy during a frontal crash.
Paige Dodd Honda, 2017-10-19 15:02:31. The 2018 Odyssey shares the same 118.1-inch wheelbase with the previous-generation Odyssey for superb second- and third-row seating roominess, easy ingress and egress, and superior ride comfort. The overall length increases fractionally to 203.2 inches due to a 0.4-inch longer rear overhang, while the width decreases by 1.1-inches to reduce frontal area, reducing aerodynamic drag. Overall height is nearly identical. The dimensional adjustments do not compromise interior roominess, as the new Odyssey offers fractionally more front and third-row headroom, retains almost identical overall passenger volume, and offers more cargo volume, with two inches more length in the cargo area, than the previous generation.
Niamh Hart Honda, 2017-10-19 15:02:32. All Odyssey trims through Touring have 5.0 mm tempered front door glass while Elite adds 4.8 mm acoustic laminated front door glass and 4.3 mm acoustic laminated rear door glass. All Odyssey trims utilize 3.5 mm rear quarter window glass and 3.5 mm tailgate glass. In addition, the available power moonroof uses 3.5mm dark gray privacy glass. The Odyssey Elite includes rain-sensing wipers that automatically activate if water is detected on the windshield. Designed to cover the maximum possible windshield area, the left (driver) and right (front passenger) windshield wipers are 25.6 inches and 22.6 inches long, respectively. They also feature breakaway wiper pivots to mitigate the potential for injury in the event of a pedestrian collision. The rear wiper is 15.7 inches long.
Niamh Hart Honda, 2017-10-19 15:02:30. The Odyssey V6 engine combines Variable Cylinder Management (VCM) with Variable Valve Timing and Lift Electronic Control (i-VTEC), which changes the lift profile, timing and lift duration of the intake valves. A switching mechanism allows each cylinder to operate with low-rpm valve lift and duration or high-rpm lift and duration. While operating in 3-cylinder mode, the rear cylinder bank rocker arms deactivate, closing all intake and exhaust valves to minimize pumping losses. The "intelligent" portion of the system is its ability to vary valve operation based on the driving situation and engine rpm. At low rpm, the i-VTEC intake valve timing and lift are optimized (low lift, short duration) for increased torque, which allows a wide range of 3-cylinder operation. As engine rpm builds past 5,350 rpm, the i-VTEC system transitions to a high-lift, long-duration intake cam profile for superior high-rpm engine power.
Caitlin Duncan Honda, 2017-10-19 15:02:31. Acoustic laminated windshield glass helps reduce noise entering the cabin on EX-L and above trims. Tuned specifically to attenuate wind-, urban- and traffic-noise frequencies, the acoustic windshield uses an outer layer of 2.0 mm safety glass, a 0.7 mm thick middle layer of acoustic polyvinyl butyral (PVB) and a 2.0 mm inner layer for a total thickness of 4.7 mm - an increase over the 4.5mm thickness of the previous-generation Honda Odyssey windshield. This helps the Odyssey place at the top of its class in wind-noise performance.
Libby Wade Honda, 2017-10-19 15:02:31. New on the 2018 Honda Odyssey are center door rails hidden under the rear side glass that replace the visible rails located on the body sides behind the rear doors on the second- through 4th-generation Odyssey. The result is a clean, seamless appearance for the rear body side and no visible side door rails or components. A safety latch prevents the left-hand sliding door from opening when the fuel lid is open. Like the front doors and tailgate, the side doors feature full 360-degree seals to reduce wind and road noise, water and debris from entering the vehicle.
Libby Wade Honda, 2017-10-19 15:02:31. In a first for Odyssey, Honda Active Shutter Grille system located below the front bumper reduces aerodynamic drag especially at cruising speeds, directly helping to improve fuel efficiency. Included on all 2018 Odyssey trims, the system uses an electric actuator controlled by a processor that tracks major temperature parameters, including engine coolant and radiator temperatures, intake air temperature, transmission oil temperature and air-conditioning requirements, all of which can vary due to weather, road conditions, vehicle speed, throttle and gear positions, and towing activity. The system either opens or closes the four shutters simultaneously to control the amount of air flowing through the engine radiator and the air conditioner condenser. The system is designed to keep the shutters closed as much as possible - even in city driving.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.