Libby Wade BMW, 2017-10-14 15:16:16. The new BMW i3s comes equipped as standard with sports suspension that includes a 10-millimetre drop in ride height. The additional 40 millimetres of track width compared to the BMW i3 is given added impact by the black wheel arch borders. The new BMW i3s is available with exclusive 20-inch light-alloy wheels in double-spoke design that are 20 millimetres wider than the previously available versions. They can be ordered in the Bicolour and Jet Black colour variants. Like the exterior design, the interior styling of the new BMW i3 and new BMW i3s is rooted in the novel LifeDrive vehicle architecture. The carbon fibre-reinforced plastic (CFRP) passenger cell has a wonderfully spacious feel about it and is dominated by a sense of lightness. The design principle of the two four-seater models means there is no need for either fixed B-pillars or a transmission tunnel. Doors that open in opposite directions allow the occupants to get in and out with the greatest of ease.
Libby Wade BMW, 2017-11-04 19:54:21. The 3rd generation of the BMW X3 continues to rely on its winning formula of a double-joint spring strut front axle and a five-link rear set-up at the rear. At the same time, this refreshingly engaging Sports Activity Vehicle delivers an even sportier driving experience than its predecessor without compromising on ride comfort. The engineers have succeeded in reducing a considerable amount in unsprung mass by fitting aluminum swivel bearings and lighter tubular anti-roll bars as well as optimizing wheel location at the front. Handling dynamics, straight-line stability and steering feel have all benefited from the improved axle kinematics and the Electric Power Steering system with Servotronic. In an effort to improve handling dynamics, the rear bias of BMW‘s xDrive all-wheel-drive system has been increased. Intelligent AWD management constantly adjusts the torque bias as the driving situation demands ensuring optimum driving dynamics.
Shannon Griffin Honda, 2017-10-19 15:02:34. To provide extra sound insulation by blocking off hollow pillars, acoustic spray foam is applied in 14 locations in the Odyssey body for the first time in Honda history. The areas include the base of the A-, B-, C- and D-pillars, as well as the base of the windshield frame and at the top of the C- and D-pillars. In addition, acoustic tape is applied at base of the A-, B- and C-pillars, and a foam stopper is applied to the bottom of the B-pillar. Altogether, the use of these body sealing techniques results in a 55-percent reduction in body leaks, which significantly reduces noise entering the cabin in critical sections. All foam and acoustic tape application is done while the unit-body is in its just manufactured "body-in-white" form - before attachment of key components and assemblies.
Caitlin Duncan Honda, 2017-10-19 15:02:33. The Odyssey V6 engine combines Variable Cylinder Management (VCM) with Variable Valve Timing and Lift Electronic Control (i-VTEC), which changes the lift profile, timing and lift duration of the intake valves. A switching mechanism allows each cylinder to operate with low-rpm valve lift and duration or high-rpm lift and duration. While operating in 3-cylinder mode, the rear cylinder bank rocker arms deactivate, closing all intake and exhaust valves to minimize pumping losses. The "intelligent" portion of the system is its ability to vary valve operation based on the driving situation and engine rpm. At low rpm, the i-VTEC intake valve timing and lift are optimized (low lift, short duration) for increased torque, which allows a wide range of 3-cylinder operation. As engine rpm builds past 5,350 rpm, the i-VTEC system transitions to a high-lift, long-duration intake cam profile for superior high-rpm engine power.
Paige Dodd Honda, 2017-10-19 15:02:34. Powering the 2018 Honda Odyssey is a 3.5-liter direct injected i-VTEC® 24-valve SOHC V6 engine with Variable Cylinder Management™ (VCM™). The new engine is common with the powerplant in the 2017 Pilot and is mated to one of two new transmissions - a 9-speed automatic (9AT), also introduced in the Pilot, for LX, EX, EX-L and EX-L NR trims, and an all-new minivan and front wheel drive-first 10-speed automatic (10AT) for Touring and Elite models. For the first time ever, all Odyssey models are equipped with steering wheel mounted paddle shifters, to give drivers greater control over transmission operation, which is particularly useful in mountainous driving or when towing. Models equipped with the new 10AT also have a new Idle-Stop capability, which further enhances fuel efficiency.
Paige Dodd Honda, 2017-10-19 15:02:34. For the first time, the new 2018 Odyssey has 1500-megapascal (MPa) ultra-high-strength steel door reinforcement beams and ultra-high-strength front door outer stiffener rings made of 1500-MPa hot-stamped steel. Laser welded and significantly stronger than ordinary steel, the ultra-high-strength steel reinforcements are designed to help better protect occupants in a frontal or side impact. Their increased strength allows the components to be made lighter which also helps reduce overall vehicle weight for improved fuel efficiency.
Kiera Shaw Honda, 2017-10-19 15:02:35. All Odyssey trims through Touring have 5.0 mm tempered front door glass while Elite adds 4.8 mm acoustic laminated front door glass and 4.3 mm acoustic laminated rear door glass. All Odyssey trims utilize 3.5 mm rear quarter window glass and 3.5 mm tailgate glass. In addition, the available power moonroof uses 3.5mm dark gray privacy glass. The Odyssey Elite includes rain-sensing wipers that automatically activate if water is detected on the windshield. Designed to cover the maximum possible windshield area, the left (driver) and right (front passenger) windshield wipers are 25.6 inches and 22.6 inches long, respectively. They also feature breakaway wiper pivots to mitigate the potential for injury in the event of a pedestrian collision. The rear wiper is 15.7 inches long.
Libby Wade Honda, 2017-10-19 15:02:34. Exclusive to the Odyssey Touring and Elite trims, LED low- and high-beam headlights provide improved nighttime illumination and visibility compared to contemporary high-intensity discharge (HID) headlights. Six LEDs serve as low beams and three LEDs serve as high beams on each side. Besides improving driver confidence and passive safety, the LED headlights use less energy, helping to enhance fuel efficiency by reducing engine loads. In addition, the LED headlights last up to five times longer than HID headlights and up to 10 times longer than halogen headlights - contributing to less frequent replacement and the associated cost savings. An auto on/off function is also included.
Eve Fitzgerald Honda, 2017-10-19 15:02:35. Like other Honda V6 powerplants, the Honda Odyssey engine 4-valve cylinder heads are a single-overhead-camshaft design, with the cams driven by the crankshaft via an automatically tensioned timing belt. Made of low-pressure die-cast, low-porosity aluminum, each cylinder head incorporates a "tumble port" design that improves combustion efficiency by creating a more homogeneous fuel-air mixture. An integrated exhaust manifold cast into each cylinder head reduces parts count, saves weight, improves flow and optimizes the location of the close-coupled catalyst on each cylinder bank for quick "light off."
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.