Eleanor Norton BMW, 2017-11-04 19:54:30. BMW i is blazing a trail when it comes to shaping the future of sustainable personal mobility. Its integrated concept focuses on responsible use of resources and incorporates material selection and innovative mobility services alongside locally emission-free driving. The BMW i3 is just as serious about the fun of driving, turning even a trip around town into an electrifying experience. The inspirational design of the BMW i3 expresses a new style, while the instantaneous power from the drive system provides an inspiring showcase for the dawn of a new era in mobility. This car’s architecture was designed from the ground up with electric mobility in mind. And its BMW eDrive technology boasts power delivery and efficiency unrivalled by any other manufacturer. All of which makes the BMW i3 a proposition as forward-looking as it is attractive. Combining the latest technological innovations with an evolutionary development of the car‘s design and the expansion of the model range has provided additional impetus for BMW‘s now familiar take on premium electric mobility. The character profiles of the new BMW i3 and new BMW i3s are focused more keenly than ever on driving pleasure, which gives them all the ingredients required to strengthen their leading position and write the next chapter in the BMW i success story.
Kiera Shaw Honda, 2017-10-18 23:58:17. The new Odyssey makes widespread use of structural adhesives in the unit-body, supplementing structural welds and significantly increasing rigidity without the additional mass of steel components. Structural adhesives are used at the roof edges and around the moonroof opening, in the front floor and cowl area, in the A- and B-pillars, around the front suspension upper mounts, and extensively throughout the rear of the body. Applied before the body panels are welded together, some 147.6 feet of adhesives (32.8 ft. more than in the previous Odyssey generation) account for approximately 3.5 percent of the entire unit-body stiffness.
Caitlin Duncan Honda, 2017-10-18 23:59:56. For the first time, the new 2018 Odyssey has 1500-megapascal (MPa) ultra-high-strength steel door reinforcement beams and ultra-high-strength front door outer stiffener rings made of 1500-MPa hot-stamped steel. Laser welded and significantly stronger than ordinary steel, the ultra-high-strength steel reinforcements are designed to help better protect occupants in a frontal or side impact. Their increased strength allows the components to be made lighter which also helps reduce overall vehicle weight for improved fuel efficiency.
Niamh Hart Honda, 2017-10-18 23:58:59. Located behind the instrument panel, the Honda Odyssey cast magnesium steering hanger beam replaces the multi-part steel unit in the previous Odyssey. Its purpose is as a structural attachment point for the steering column and instrument panel, as well as a structural element that helps the passenger cabin retain its shape in certain collisions. For the first time, the Odyssey body structure also utilizes composite materials to further reduce weight while enhancing rigidity and noise dampening. One example is inside the C-pillars, where composite stiffeners, together with the structural foam mentioned above help improve body rigidity. Another example is the base that supports the Odyssey battery. Created from a single composite casting, it holds the battery securely while adding minimal weight to the overall body structure, saving 2.9 lbs. over the previous Odyssey.
Shannon Griffin Honda, 2017-10-18 23:59:37. Included on the Odyssey LX, EX, EX-L and EX-L N/R, projector-beam-style halogen headlights feature round outboard low beams and round inboard high-beam illumination. The Odyssey LX headlights have an auto-off feature to protect the battery state of charge if the driver leaves the vehicle without switching off the lights, while Odyssey EX and above trims add the convenience and safety of auto on/off high beams (AHB).
Paige Dodd Toyota, 2017-10-18 07:14:45. The new Toyota Camry utilizes TNGA (Toyota New Global Architecture), which represents a completely new strategy to the way the company designs, engineers, and packages its vehicles. TNGA retains all of Toyota‘s traditional values of superlative build quality and safety while injecting a fun driving experience that plays on all the senses. The physical manifestation is the usage of a new engine, transmission and GA-K platform. "With an exhilarating design, refined interior, stirring driving performance, cutting-edge safety and technology, and class-leading fuel efficiency, the all-new Camry retains its excellent value while raising its level of fun and excitement to new heights," said Bill Fay, Toyota senior vice president of automotive operations. "It is, quite simply, the best Camry ever and the benchmark in the mid-size sedan segment."
Paige Dodd Honda, 2017-10-18 23:59:20. To provide extra sound insulation by blocking off hollow pillars, acoustic spray foam is applied in 14 locations in the Odyssey body for the first time in Honda history. The areas include the base of the A-, B-, C- and D-pillars, as well as the base of the windshield frame and at the top of the C- and D-pillars. In addition, acoustic tape is applied at base of the A-, B- and C-pillars, and a foam stopper is applied to the bottom of the B-pillar. Altogether, the use of these body sealing techniques results in a 55-percent reduction in body leaks, which significantly reduces noise entering the cabin in critical sections. All foam and acoustic tape application is done while the unit-body is in its just manufactured "body-in-white" form - before attachment of key components and assemblies.
Libby Wade Toyota, 2017-10-18 07:14:21. Among the many features on the 2018 Camry is the standard Toyota Safety Sense™ P (TSS-P) suite of safety systems and technologies that is helping to make gradual progress towards Toyota Motor Corporation’s ultimate goal of "zero casualties from accidents." This multi-feature advanced active safety suite bundles cutting edge active safety technologies including Pre-Collision System with Pedestrian Detection (PCS w/PD), Dynamic Radar Cruise Control (DRCC), Lane Departure Alert with Steering Assist (LDA w/SA); and Automatic High Beams (AHB). Select models will also come with standard Blind Spot Monitor (BSM) with Rear Cross Traffic Alert (RCTA). The available Intelligent Clearance Sonar (ICS) also includes a new Rear Cross Traffic Braking (RCTB) system.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.