Eleanor Norton BMW, 2017-11-04 19:54:30. The new BMW i3s provides an even sportier interpretation of silent mobility with zero local emissions and features a high-performance 135 kW/184 hp electric motor that generates peak torque of 270 Nm (199 lb-ft). Its updated drive system includes modified motor control and specific taper roller bearings, which have been utilised to further optimise power delivery and the performance curve at higher rpm. At the limits of the motor speed range, the power and torque of the further developed drive system represent an improvement of up to 40% for the BMW i3. What’s more, the new BMW i3s boasts sports suspension with specially developed springs, dampers and anti-roll bars. Drivers can also select SPORT mode using the Driving Experience Control switch. This initiates more direct accelerator response and tighter steering characteristics to further accentuate the car’s sporting edge.
Paige Dodd Honda, 2017-10-18 23:59:20. For the first time, the new 2018 Odyssey has 1500-megapascal (MPa) ultra-high-strength steel door reinforcement beams and ultra-high-strength front door outer stiffener rings made of 1500-MPa hot-stamped steel. Laser welded and significantly stronger than ordinary steel, the ultra-high-strength steel reinforcements are designed to help better protect occupants in a frontal or side impact. Their increased strength allows the components to be made lighter which also helps reduce overall vehicle weight for improved fuel efficiency.
Mollie Slater Honda, 2017-10-19 15:02:27. The Odyssey new engine - from the Honda EarthDreams® Technology powertrain series - is rated at 280 peak horsepower and 262 lb.-ft. peak torque. Peak engine output is up 32 horsepower and 12 pound-feet of torque from the previous model, with increased torque over the engine entire operating (rpm) range. The new, more efficient engine and transmissions, along with as much as a 75-pound reduction in vehicle weight (EX-L trim) and improved aerodynamics, among other reductions to running resistance, result in enhanced performance and fuel efficiency. With its 60-degree V-angle, the Odyssey V6 engine is inherently smooth and has compact overall dimensions that allow efficient packaging within the vehicle. The engine has a high-pressure die-cast lightweight aluminum alloy block with cast-in-place iron cylinder liners. Made with a centrifugal spin-casting process, the thin-wall liners are high in strength and low in porosity. The block incorporates a deep-skirt design with four bolts per bearing cap for rigid crankshaft support and minimized noise and vibration. The engine also uses a high-tensile strength steel crankshaft is for minimum weight.
Caitlin Duncan Honda, 2017-10-18 23:59:56. To further improve emissions compliance, the 3.5-liter V6 makes use of an after-catalytic-converter exhaust gas recirculation (EGR) system that allows cleaner, cooler EGR gas to be fed back into the intake system. An EGR system, especially one that delivers a cleaner, cooler charge, reduces pumping loss for better fuel efficiency. With its 60-degree V-angle and compact, rigid and lightweight high-pressure die-cast aluminum cylinder block assembly, the 3.5-liter V6 powerplant is exceptionally smooth during operation. Other factors that help reduce engine noise and vibration are a rigid forged-steel crankshaft, die-cast accessory mounts, and a stiff cast-aluminum oil pan that reduces cylinder block flex.
Eleanor Norton Honda, 2017-10-19 00:00:12. The Honda Odyssey new direct-injection system enables increased torque across the engine full operating range along with higher fuel efficiency. The system features a compact, high-pressure, direct-injection pump that allows both high fuel flow and pulsation suppression, while variable pressure control optimizes injector operation. A multi-hole injector delivers fuel directly into each cylinder (not to the intake port, as in the previous generation Odyssey), allowing for more efficient combustion. The multi-hole injectors can create the ideal stoichiometric fuel/air mixture in the cylinders for good emissions control. Theoretically, a stoichiometric mixture has just enough air to completely burn the available fuel. Based on the operating conditions, the direct-injection system alters its function for best performance. Upon cold engine startup, fuel is injected into the cylinders on the compression stroke. This creates a weak stratified charge effect that improves engine start-up and reduces exhaust emissions before a normal operating temperature is reached.
Paige Dodd Honda, 2017-10-19 15:02:27. The new fifth-generation Odyssey is a progressive and sporty evolution of the Odyssey well-known exterior form. In front, the 2018 model includes the latest version of Honda trapezoid grille, with boldly restyled chrome bars, stylized headlights, and new wing-shaped LED daytime running lights (DRL) lending a premium appearance on EX and above models. Bright LED headlights and fog lights complete the Touring and Elite trims. The hood gains new character lines that add a more visually enticing and sophisticated look, while the front fascia invokes a sports sedan, with a large lower air inlet.
Shannon Griffin Honda, 2017-10-18 23:59:37. Once the engine is fully warmed up, for maximum power and fuel efficiency fuel is injected during the intake stroke. This helps create a more homogeneous fuel/air mix in the cylinder that is aided by the high-tumble intake port design. This improves volumetric efficiency, and the cooling effect of the incoming fuel improves anti-knock performance. Every 2018 Odyssey is equipped with an ECON button that helps improve fuel efficiency by modifying throttle mapping and HVAC operation. When the system is operating, a green ECO indicator appears on the instrument panel and the Drive-by-Wire throttle system provides a more gradual response. To save additional energy, the climate control system characteristics are altered based on the conditions. A green coaching light in the instrument display gives the driver feedback to help improve their real-world fuel economy and instant or average fuel economy can be displayed.
Caitlin Duncan Honda, 2017-10-19 15:02:27. For the first time, the new 2018 Odyssey has 1500-megapascal (MPa) ultra-high-strength steel door reinforcement beams and ultra-high-strength front door outer stiffener rings made of 1500-MPa hot-stamped steel. Laser welded and significantly stronger than ordinary steel, the ultra-high-strength steel reinforcements are designed to help better protect occupants in a frontal or side impact. Their increased strength allows the components to be made lighter which also helps reduce overall vehicle weight for improved fuel efficiency.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.