Eleanor Norton BMW, 2017-11-04 19:54:30. The BMW i8 Protonic Frozen Yellow Edition - which will be produced in a limited run and go on sale in September 2017 - owes its striking appearance to a model-specific paint finish. The exclusive exterior shade Protonic Frozen Yellow shares its canvas with accents in Frozen Grey metallic. A sophisticated application process is employed to transfer the paint to the BMW i8‘s carbon fibre-reinforced plastic (CFRP) bodywork. The silky-matt shimmer of the finish shines a particularly vivid spotlight on the plug-in-hybrid sports car‘s dynamic lines and flowing surface design. The special-edition model will sport newly designed 20-inch BMW i light-alloy wheels in W-Spoke design with mattpainted surfaces and mixed-size tyres.
Mollie Slater Honda, 2017-10-19 15:02:29. The Odyssey new engine - from the Honda EarthDreams® Technology powertrain series - is rated at 280 peak horsepower and 262 lb.-ft. peak torque. Peak engine output is up 32 horsepower and 12 pound-feet of torque from the previous model, with increased torque over the engine entire operating (rpm) range. The new, more efficient engine and transmissions, along with as much as a 75-pound reduction in vehicle weight (EX-L trim) and improved aerodynamics, among other reductions to running resistance, result in enhanced performance and fuel efficiency. With its 60-degree V-angle, the Odyssey V6 engine is inherently smooth and has compact overall dimensions that allow efficient packaging within the vehicle. The engine has a high-pressure die-cast lightweight aluminum alloy block with cast-in-place iron cylinder liners. Made with a centrifugal spin-casting process, the thin-wall liners are high in strength and low in porosity. The block incorporates a deep-skirt design with four bolts per bearing cap for rigid crankshaft support and minimized noise and vibration. The engine also uses a high-tensile strength steel crankshaft is for minimum weight.
Millie Lowe Honda, 2017-10-19 15:02:30. The Odyssey V6 engine combines Variable Cylinder Management (VCM) with Variable Valve Timing and Lift Electronic Control (i-VTEC), which changes the lift profile, timing and lift duration of the intake valves. A switching mechanism allows each cylinder to operate with low-rpm valve lift and duration or high-rpm lift and duration. While operating in 3-cylinder mode, the rear cylinder bank rocker arms deactivate, closing all intake and exhaust valves to minimize pumping losses. The "intelligent" portion of the system is its ability to vary valve operation based on the driving situation and engine rpm. At low rpm, the i-VTEC intake valve timing and lift are optimized (low lift, short duration) for increased torque, which allows a wide range of 3-cylinder operation. As engine rpm builds past 5,350 rpm, the i-VTEC system transitions to a high-lift, long-duration intake cam profile for superior high-rpm engine power.
Libby Wade Honda, 2017-10-19 15:02:31. The new fifth-generation Odyssey is a progressive and sporty evolution of the Odyssey well-known exterior form. In front, the 2018 model includes the latest version of Honda trapezoid grille, with boldly restyled chrome bars, stylized headlights, and new wing-shaped LED daytime running lights (DRL) lending a premium appearance on EX and above models. Bright LED headlights and fog lights complete the Touring and Elite trims. The hood gains new character lines that add a more visually enticing and sophisticated look, while the front fascia invokes a sports sedan, with a large lower air inlet.
Mollie Slater Honda, 2017-10-19 15:02:29. Odyssey EX, EX-L, Touring and Elite trims have bright, distinctive LED Daytime Running Lights (DRL). A signature design feature of the new Odyssey, the DRLs utilize Honda characteristic wing shape positioned below and beside the low-beam headlights. Shaped to match the modern, elegant and athletic look of the new Odyssey, the LED DRL array tapers as it moves from the body side toward the inside of the headlight lens. Stylistically, the DRLs strongly and clearly define the front corners of the Odyssey.
Mollie Slater Honda, 2017-10-19 15:02:30. The Odyssey Electronic Control Unit (ECU) monitors engine functions to determine the best ignition spark timing. Two engine block-mounted acoustic detonation/knock sensors "listen" to the engine, and based on this input, the ECU can retard the ignition timing to prevent potentially damaging detonation. The engine has an ignition coil unit for each cylinder positioned within each spark plug access bore. To help improve fuel efficiency, the Odyssey Touring and Elite are equipped with Idle-Stop capability. When the system is enabled by the driver and certain operating conditions are met, the Idle-Stop system will automatically shut off the engine when the vehicle comes to a stop. The engine is automatically restarted when the driver releases the brake pedal after a stop, or if the steering wheel is turned. If the Brake Hold system is in use, the engine quickly restarts after the throttle is depressed.
Niamh Hart Honda, 2017-10-19 15:02:30. New on the 2018 Honda Odyssey are center door rails hidden under the rear side glass that replace the visible rails located on the body sides behind the rear doors on the second- through 4th-generation Odyssey. The result is a clean, seamless appearance for the rear body side and no visible side door rails or components. A safety latch prevents the left-hand sliding door from opening when the fuel lid is open. Like the front doors and tailgate, the side doors feature full 360-degree seals to reduce wind and road noise, water and debris from entering the vehicle.
Niamh Hart Honda, 2017-10-19 15:02:29. To further improve emissions compliance, the 3.5-liter V6 makes use of an after-catalytic-converter exhaust gas recirculation (EGR) system that allows cleaner, cooler EGR gas to be fed back into the intake system. An EGR system, especially one that delivers a cleaner, cooler charge, reduces pumping loss for better fuel efficiency. With its 60-degree V-angle and compact, rigid and lightweight high-pressure die-cast aluminum cylinder block assembly, the 3.5-liter V6 powerplant is exceptionally smooth during operation. Other factors that help reduce engine noise and vibration are a rigid forged-steel crankshaft, die-cast accessory mounts, and a stiff cast-aluminum oil pan that reduces cylinder block flex.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.