Shannon Griffin BMW, 2017-11-04 19:54:09. The all-new BMW X3 line-up from launch consists of BMW TwinPower Turbo technology 2.0-liter 4-cylinder inline gasoline engine with Double-VANOS variable camshaft timing and Valvetronic fully variable intake lift, a map-controlled oil pump, electric arc wire-sprayed cylinder barrels, Twin-scroll exhaust turbocharger and electrically adjustable waste gate valve. The latest M Performance model, the BMW X3 M40i comes with a 3.0-liter M Performance TwinPower Turbo 6-cylinder inline gasoline engine. The intake manifold integrated indirect charge air intercooler allows for a lower charge air volume between the compressor and intake valves, noticeably improving engine response. This translates to shorter air routing, faster boost pressure build-up, and throttle response. Both engines come from the latest generation of BMW engines. Improvements have also been made to both the 8-speed Steptronic Sport automatic transmission with shift paddles and the BMW xDrive intelligent all-wheel-drive system to increase efficiency.
Eleanor Norton BMW, 2017-11-04 19:54:30. The all-new BMW X3 M40i heralds the arrival of the first ever M Performance Automobile in this model series. Power comes from a new M Performance TwinPower Turbo 6-cylinder inline engine, which blends its insatiable appetite for revs and sublime pulling power with exemplary smoothness and efficiency. The 3.0-liter unit generates power output of 355 hp from 5,500 - 6,500 rpm. Peak torque of 369 lb-ft from 1,520 - 4,800 rpm, provide a 69 lb-ft - or 23 percent - increase (compared to the outgoing BMW X3 xDrive35i). This performance arsenal equips the all-new BMW X3 M40i to a best in segment sprint from 0 to 60 mph in 4.6 seconds and hit a top speed of 155 mph.
Shannon Griffin BMW, 2017-10-14 15:16:13. The new BMW i3s comes equipped as standard with sports suspension that includes a 10-millimetre drop in ride height. The additional 40 millimetres of track width compared to the BMW i3 is given added impact by the black wheel arch borders. The new BMW i3s is available with exclusive 20-inch light-alloy wheels in double-spoke design that are 20 millimetres wider than the previously available versions. They can be ordered in the Bicolour and Jet Black colour variants. Like the exterior design, the interior styling of the new BMW i3 and new BMW i3s is rooted in the novel LifeDrive vehicle architecture. The carbon fibre-reinforced plastic (CFRP) passenger cell has a wonderfully spacious feel about it and is dominated by a sense of lightness. The design principle of the two four-seater models means there is no need for either fixed B-pillars or a transmission tunnel. Doors that open in opposite directions allow the occupants to get in and out with the greatest of ease.
Niamh Hart Audi, 2017-10-13 02:40:48. The fast, spontaneously and sportily shifting eight-speed tiptronic with optimized shift times is standard on the new Audi RS5 Coupe. The layout of its gear sets and shifting elements results in low drag torques and thereby to a high efficiency level. Its large number of gears very frequently makes it possible to operate the engine close to its ideal load point. The lower gears have short, sporty ratios, while the upper gears are long in order to reduce revs and fuel consumption.
Shannon Griffin Ford Fiesta, 2017-10-13 02:45:51. Among a class-leading range of Fiesta driver assistance features - supported by sensor technologies capable of monitoring up to 130 metres ahead - is an enhanced Pedestrian Detection system that for the first time can help prevent collisions at night; and the first Ford Active Park Assist system that can deliver brake interventions to prevent low-speed bumps when parking hands-free.
Eve Fitzgerald Audi, 2017-10-13 02:44:01. In the classic Miller cycle, the reduced cylinder charge is detrimental to torque and power output. These aspects have been neutralized by Audi thanks to the implementation of turbocharging and the two-stage Audi valvelift system (AVS). The four camshafts of the 2.9 TFSI can each be adjusted by 50 degrees crank angle. At higher load and engine speed ranges, AVS closes the inlet valve later. The opening time increases from 130 to 200 degrees crankshaft angle, while at the same time the valve lift increases from 6.0 to 10.0 millimeters (0.2 to 0.4 in). Cylinder charging also increases considerably - the 2.9 TFSI revs up powerfully and delivers an impressive output.
Libby Wade Audi, 2017-10-13 02:52:55. A further efficiency component of the 2.9 TFSI is the thermal management system. The crankcase and the cylinder head have separate coolant circuits. After a cold start, the switchable water pump controls the flow of coolant through the engine so that the oil is warmed up as quickly as possible. The exhaust manifolds are integrated in the cylinder head, and coolant circulates around them which helps ensure rapid warming up. When the engine is warm, this technology lowers the exhaust temperatures - consumption drops drastically, especially when driving in a sporty way. The great efficiency of the V6 bi-turbo is also partly to do with low friction. For example, the fully adjustable oil pump only builds up as much pressure as necessary.
Caitlin Duncan Audi, 2017-10-13 03:01:57. The axle concept of the new RS5 Coupe enables optimal absorption of longitudinal and transverse forces. A revised five-link construction is used on the front axle. At the rear, a five-link suspension replaces the trapezoidal-link suspension used on the previous model. This benefits the sporty driving characteristics and agility. It also improves comfort significantly. With the standard RS sport suspension, the new RS5 Coupe sits 7 millimeters (0.3 in) lower than the base model. Audi Sport offers the RS sport suspension plus with Dynamic Ride Control (DRC) as an alternative. It uses steel springs and three-stage adjustable dampers that are connected to one another via diagonal oil lines and a central valve. When cornering at speed, the valves regulate the oil flow in the shock absorber of the spring-deflected front wheel at the outside of the curve. They increase the support provided and reduce pitch and roll movements. They thus connect the vehicle more closely to the road and improve handling. A new damper generation with integrated control valve ensures much more noticeable spread between the individual modes of the Audi drive select system.
Mollie Slater Audi, 2017-10-13 02:58:07. The high-output V6 doesn’t just impress with its strong performance, but also with its high level of efficiency. In the NEDC, it consumes just 8.7 liters of fuel per 100 kilometers (27.0 US mpg), which corresponds to 197 grams CO2 per kilometer (317.0 g/mi). This means a 17 percent consumption saving compared with the previous model. A decisive factor in this is the new TFSI combustion process from Audi, which is known as the B-cycle. It has been specifically designed for the partial-load range, which is the predominant operating mode during normal use.
Millie Lowe Ford Fiesta, 2017-10-13 03:03:44. Ford revealed the next generation Ford Fiesta - the world’s most technologically advanced small car - at a special Go Further event in Cologne, Germany. The next generation Fiesta is unveiled with the most sophisticated range of driver assistance technologies and connectivity features ever in a volume small car in Europe, as part of the most comprehensive and versatile line-up of variants in 40 years of Fiesta history.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.