Kiera Shaw BMW, 2017-11-04 19:54:23. The synchronous electric motor powering the new BMW i3 generates a maximum output of 125 kW/170 hp. Its peak torque is 250 Nm (184 lb-ft), all of which is available instantly from a standstill, as is usual with electric motors. This means that stepping on the accelerator pedal immediately unleashes a thrilling burst of speed. The motor smoothly delivers the kind of performance that drivers expect from a BMW via a single-speed automatic transmission, with continuous power delivery that builds up the car’s tempo in a characteristically dynamic fashion. 0-100 km/h (62 mph) is achieved by the new BMW i3 in 7.3 seconds. Its top speed is limited to 150 km/h (93 mph).
Eve Fitzgerald Honda, 2017-10-19 15:02:32. Once the engine is fully warmed up, for maximum power and fuel efficiency fuel is injected during the intake stroke. This helps create a more homogeneous fuel/air mix in the cylinder that is aided by the high-tumble intake port design. This improves volumetric efficiency, and the cooling effect of the incoming fuel improves anti-knock performance. Every 2018 Odyssey is equipped with an ECON button that helps improve fuel efficiency by modifying throttle mapping and HVAC operation. When the system is operating, a green ECO indicator appears on the instrument panel and the Drive-by-Wire throttle system provides a more gradual response. To save additional energy, the climate control system characteristics are altered based on the conditions. A green coaching light in the instrument display gives the driver feedback to help improve their real-world fuel economy and instant or average fuel economy can be displayed.
Niamh Hart Honda, 2017-10-19 15:02:32. The 2018 Odyssey receives the most thorough and intensive array of aerodynamic refinements of any Odyssey generation to date. This comprehensive approach boosts aerodynamic efficiency and reduces wind noise. Examples of the aero efforts found on the 2018 Odyssey include extensive under covers, the Active Shutter Grille system, hidden windshield wipers, wind-sculptured side mirrors (power folding on Elite), and many small but pertinent details such as under-body strakes, shark fin-type antenna, and a rear spoiler (black on LX, EX, EX-L and Touring trims, body-color on Elite).
Libby Wade Honda, 2017-10-19 15:02:31. The new Odyssey makes widespread use of structural adhesives in the unit-body, supplementing structural welds and significantly increasing rigidity without the additional mass of steel components. Structural adhesives are used at the roof edges and around the moonroof opening, in the front floor and cowl area, in the A- and B-pillars, around the front suspension upper mounts, and extensively throughout the rear of the body. Applied before the body panels are welded together, some 147.6 feet of adhesives (32.8 ft. more than in the previous Odyssey generation) account for approximately 3.5 percent of the entire unit-body stiffness.
Caitlin Duncan Honda, 2017-10-19 15:02:32. Unique C-shaped taillights give the Honda Odyssey a more luxurious and modern rear appearance, as does expansive chrome trim joining the taillights across the tailgate. Additional character lines visually divide the tailgate into lower, mid and upper segments, with light playing differently on each surface for more visual appeal.
Libby Wade Honda, 2017-10-19 15:02:33. The Honda Odyssey Drive-by-Wire throttle system replaces a conventional throttle cable with smart electronics that "connect" the accelerator pedal to a throttle valve inside the throttle-body. The result is less under-hood clutter and lower weight, as well as quicker and more accurate throttle actuation. Plus, a tunable "gain" rate - the relationship between throttle pedal application and throttle opening - offers improved drivability and optimized engine response to suit specific driving conditions. Honda Drive-by-Wire throttle system establishes the current driving conditions by monitoring throttle pedal position, throttle valve position, engine speed (rpm) and road speed. This information is used to define the throttle control sensitivity that gives the Odyssey throttle pedal a predictable and responsive feel that meets driver expectations.
Shannon Griffin Honda, 2017-10-19 15:02:32. Acoustic laminated windshield glass helps reduce noise entering the cabin on EX-L and above trims. Tuned specifically to attenuate wind-, urban- and traffic-noise frequencies, the acoustic windshield uses an outer layer of 2.0 mm safety glass, a 0.7 mm thick middle layer of acoustic polyvinyl butyral (PVB) and a 2.0 mm inner layer for a total thickness of 4.7 mm - an increase over the 4.5mm thickness of the previous-generation Honda Odyssey windshield. This helps the Odyssey place at the top of its class in wind-noise performance.
Caitlin Duncan Honda, 2017-10-19 15:02:31. Based on Honda global light truck platform, the 2018 Odyssey body structure has 44-percent greater torsional rigidity than the previous model. High-strength steel comprises 58 percent of the body structure, contributing to both improved stiffness and reduced mass for the unit-body. Stiffening the body with ultra-high-strength steel, hot-stamped steel and adhesives in critical areas likewise directly contribute to reduced noise and vibration, and improved ride and handling. The structural improvements also help reduce mass, directly contributing to increased fuel efficiency.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.