Niamh Hart Audi, 2017-11-04 19:54:15. The driver can select between the D and S modes and can use the special RS shift paddles on the steering wheel for manual gear changes. All commands are transmitted to the transmission electrically - by wire. The dynamic starting function controls starts with optimum traction. Using it, the Audi RS5 Coupe can unfold its full acceleration potential. Prerequisite: the ESC sport mode must be active and the selector lever must be in the S position.
Caitlin Duncan Honda, 2017-10-19 15:02:28. The strength of the "tailgate ring" (the circular metal structure surrounding the tailgate) is vitally important for superior vehicle handling, stability and ride quality. Debuting on the 2016 Honda Pilot and applied to the 2018 Odyssey for the first time, this advanced tailgate ring contributes to the new model gain in torsional rigidity, benefiting ride, handling and NVH. For the first time in the Odyssey, body stiffness is enhanced using structural foam inserts in key locations. These include the left and right C-pillar stiffeners, and within an inside bracket that connects the left and right side center frames under the front floor. The improved body stiffness pays dividends in handling precision, ride quality, NVH and crash safety.
Paige Dodd Honda, 2017-10-19 15:02:27. The new Odyssey makes widespread use of structural adhesives in the unit-body, supplementing structural welds and significantly increasing rigidity without the additional mass of steel components. Structural adhesives are used at the roof edges and around the moonroof opening, in the front floor and cowl area, in the A- and B-pillars, around the front suspension upper mounts, and extensively throughout the rear of the body. Applied before the body panels are welded together, some 147.6 feet of adhesives (32.8 ft. more than in the previous Odyssey generation) account for approximately 3.5 percent of the entire unit-body stiffness.
Caitlin Duncan Honda, 2017-10-19 15:02:27. Powering the 2018 Honda Odyssey is a 3.5-liter direct injected i-VTEC® 24-valve SOHC V6 engine with Variable Cylinder Management™ (VCM™). The new engine is common with the powerplant in the 2017 Pilot and is mated to one of two new transmissions - a 9-speed automatic (9AT), also introduced in the Pilot, for LX, EX, EX-L and EX-L NR trims, and an all-new minivan and front wheel drive-first 10-speed automatic (10AT) for Touring and Elite models. For the first time ever, all Odyssey models are equipped with steering wheel mounted paddle shifters, to give drivers greater control over transmission operation, which is particularly useful in mountainous driving or when towing. Models equipped with the new 10AT also have a new Idle-Stop capability, which further enhances fuel efficiency.
Mollie Slater Honda, 2017-10-19 15:02:27. The Honda Odyssey new direct-injection system enables increased torque across the engine full operating range along with higher fuel efficiency. The system features a compact, high-pressure, direct-injection pump that allows both high fuel flow and pulsation suppression, while variable pressure control optimizes injector operation. A multi-hole injector delivers fuel directly into each cylinder (not to the intake port, as in the previous generation Odyssey), allowing for more efficient combustion. The multi-hole injectors can create the ideal stoichiometric fuel/air mixture in the cylinders for good emissions control. Theoretically, a stoichiometric mixture has just enough air to completely burn the available fuel. Based on the operating conditions, the direct-injection system alters its function for best performance. Upon cold engine startup, fuel is injected into the cylinders on the compression stroke. This creates a weak stratified charge effect that improves engine start-up and reduces exhaust emissions before a normal operating temperature is reached.
Millie Lowe Honda, 2017-10-19 15:02:28. The new Honda Odyssey includes an underbody aero package consisting of a 2-piece undercover behind the front fascia and underneath the engine and transmission, flat underbody surfaces extending between the front and rear wheel areas, air-diverting strakes positioned ahead of all four tires, and an additional undercover behind the left rear tire (the tailpipe occupies the space behind the right rear tire). These undercovers directly improve fuel efficiency, particularly on the highway.
Kiera Shaw Honda, 2017-10-19 15:02:27. Wraparound chrome trim adds a luxurious touch on all trims, as do chrome door handles on EX and above trims, and body-color lower side sills on the Touring and Elite trims. Re-engineering the sliding side door mechanisms removes the previous models visible rails along the rear body sides, giving the new Odyssey a cleaner appearance, while the larger 18-inch and available 19-inch wheels and tires further bolster the 2018 Odyssey athletic stance.
Shannon Griffin Honda, 2017-10-19 15:02:28. To further improve emissions compliance, the 3.5-liter V6 makes use of an after-catalytic-converter exhaust gas recirculation (EGR) system that allows cleaner, cooler EGR gas to be fed back into the intake system. An EGR system, especially one that delivers a cleaner, cooler charge, reduces pumping loss for better fuel efficiency. With its 60-degree V-angle and compact, rigid and lightweight high-pressure die-cast aluminum cylinder block assembly, the 3.5-liter V6 powerplant is exceptionally smooth during operation. Other factors that help reduce engine noise and vibration are a rigid forged-steel crankshaft, die-cast accessory mounts, and a stiff cast-aluminum oil pan that reduces cylinder block flex.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.