Eve Fitzgerald Ford Fiesta, 2017-11-04 19:54:24. The next generation Fiesta delivers improved quality through enhanced specification, innovative engineering, and sophisticated design, including Fiesta’s first openable, full length, panoramic glass roof comprising two almost-full width panes of toughened, tinted glass. Optimised exterior finishing delivers a more upscale appearance. Parking sensors are now fitted flush with the body panels; windscreen washer nozzles are hidden beneath the upper bonnet lip; there are no visible screws in the taillights or rear fascia; the shut line between the roof and the rear liftgate is reduced by more than 30 per cent - all examples of the Fiesta team’s obsession with quality that customers will instantly appreciate.
Eve Fitzgerald Honda, 2017-10-19 15:02:32. Located under the front floor of the new Honda Odyssey is a variation of the "3-Bone" structure used in the Pilot that improves impact load management, directing energy around the passenger cabin in the event of a frontal collision. The structure creates three different load pathways, or "backbones," that channel collision energy. One channels collision forces from the front of the vehicle directly underneath the passenger cabin; the other two channel collision forces under the vehicle left and right side frames. The result is an improved capability to safely channel energy during a frontal crash.
Paige Dodd Honda, 2017-10-19 15:02:31. The new fifth-generation Odyssey is a progressive and sporty evolution of the Odyssey well-known exterior form. In front, the 2018 model includes the latest version of Honda trapezoid grille, with boldly restyled chrome bars, stylized headlights, and new wing-shaped LED daytime running lights (DRL) lending a premium appearance on EX and above models. Bright LED headlights and fog lights complete the Touring and Elite trims. The hood gains new character lines that add a more visually enticing and sophisticated look, while the front fascia invokes a sports sedan, with a large lower air inlet.
Niamh Hart Honda, 2017-10-19 15:02:30. To provide extra sound insulation by blocking off hollow pillars, acoustic spray foam is applied in 14 locations in the Odyssey body for the first time in Honda history. The areas include the base of the A-, B-, C- and D-pillars, as well as the base of the windshield frame and at the top of the C- and D-pillars. In addition, acoustic tape is applied at base of the A-, B- and C-pillars, and a foam stopper is applied to the bottom of the B-pillar. Altogether, the use of these body sealing techniques results in a 55-percent reduction in body leaks, which significantly reduces noise entering the cabin in critical sections. All foam and acoustic tape application is done while the unit-body is in its just manufactured "body-in-white" form - before attachment of key components and assemblies.
Libby Wade Honda, 2017-10-19 15:02:31. Like other Honda V6 powerplants, the Honda Odyssey engine 4-valve cylinder heads are a single-overhead-camshaft design, with the cams driven by the crankshaft via an automatically tensioned timing belt. Made of low-pressure die-cast, low-porosity aluminum, each cylinder head incorporates a "tumble port" design that improves combustion efficiency by creating a more homogeneous fuel-air mixture. An integrated exhaust manifold cast into each cylinder head reduces parts count, saves weight, improves flow and optimizes the location of the close-coupled catalyst on each cylinder bank for quick "light off."
Mollie Slater Honda, 2017-10-19 15:02:30. To further improve emissions compliance, the 3.5-liter V6 makes use of an after-catalytic-converter exhaust gas recirculation (EGR) system that allows cleaner, cooler EGR gas to be fed back into the intake system. An EGR system, especially one that delivers a cleaner, cooler charge, reduces pumping loss for better fuel efficiency. With its 60-degree V-angle and compact, rigid and lightweight high-pressure die-cast aluminum cylinder block assembly, the 3.5-liter V6 powerplant is exceptionally smooth during operation. Other factors that help reduce engine noise and vibration are a rigid forged-steel crankshaft, die-cast accessory mounts, and a stiff cast-aluminum oil pan that reduces cylinder block flex.
Libby Wade Honda, 2017-10-19 15:02:31. Located under the front floor of the new Honda Odyssey is a variation of the "3-Bone" structure used in the Pilot that improves impact load management, directing energy around the passenger cabin in the event of a frontal collision. The structure creates three different load pathways, or "backbones," that channel collision energy. One channels collision forces from the front of the vehicle directly underneath the passenger cabin; the other two channel collision forces under the vehicle left and right side frames. The result is an improved capability to safely channel energy during a frontal crash.
Caitlin Duncan Honda, 2017-10-19 15:02:31. The 2018 Odyssey receives the most thorough and intensive array of aerodynamic refinements of any Odyssey generation to date. This comprehensive approach boosts aerodynamic efficiency and reduces wind noise. Examples of the aero efforts found on the 2018 Odyssey include extensive under covers, the Active Shutter Grille system, hidden windshield wipers, wind-sculptured side mirrors (power folding on Elite), and many small but pertinent details such as under-body strakes, shark fin-type antenna, and a rear spoiler (black on LX, EX, EX-L and Touring trims, body-color on Elite).
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.