Eve Fitzgerald Ford Fiesta, 2017-11-04 19:54:24. The next generation Fiesta delivers improved quality through enhanced specification, innovative engineering, and sophisticated design, including Fiesta’s first openable, full length, panoramic glass roof comprising two almost-full width panes of toughened, tinted glass. Optimised exterior finishing delivers a more upscale appearance. Parking sensors are now fitted flush with the body panels; windscreen washer nozzles are hidden beneath the upper bonnet lip; there are no visible screws in the taillights or rear fascia; the shut line between the roof and the rear liftgate is reduced by more than 30 per cent - all examples of the Fiesta team’s obsession with quality that customers will instantly appreciate.
Libby Wade Honda, 2017-10-19 15:02:31. The Odyssey new engine - from the Honda EarthDreams® Technology powertrain series - is rated at 280 peak horsepower and 262 lb.-ft. peak torque. Peak engine output is up 32 horsepower and 12 pound-feet of torque from the previous model, with increased torque over the engine entire operating (rpm) range. The new, more efficient engine and transmissions, along with as much as a 75-pound reduction in vehicle weight (EX-L trim) and improved aerodynamics, among other reductions to running resistance, result in enhanced performance and fuel efficiency. With its 60-degree V-angle, the Odyssey V6 engine is inherently smooth and has compact overall dimensions that allow efficient packaging within the vehicle. The engine has a high-pressure die-cast lightweight aluminum alloy block with cast-in-place iron cylinder liners. Made with a centrifugal spin-casting process, the thin-wall liners are high in strength and low in porosity. The block incorporates a deep-skirt design with four bolts per bearing cap for rigid crankshaft support and minimized noise and vibration. The engine also uses a high-tensile strength steel crankshaft is for minimum weight.
Paige Dodd Honda, 2017-10-19 15:02:31. Odyssey EX and above trims include power sliding side doors that can be activated by a switch (to operate left, right or both doors) on the instrument panel, by a switch from the second-row seating area, by pulling on either the interior or exterior door handle, or by buttons (left or right) on the remote key fob. The system features improved operating logic. In the previous Odyssey generation, if the driver and a passenger outside the vehicle were to each activate a power side door at approximately the same time, the door could start to open with the first person action, and then stop as soon as the second person took action. To eliminate this on the 2018 Odyssey, new door logic enables the door to operate as intended if two identical activations (such as the driver and a passenger both wishing to open a door) are entered within a half second of each other. For instance, if a parent pulls up to the curb at school and presses the power side door open button at approximately the same time as does a child waiting curbside, the door will open as desired. If longer than a half second passes between activations, door operation will stop, and a warning beep will sound.
Caitlin Duncan Honda, 2017-10-19 15:02:31. Exclusive to the Odyssey Touring and Elite trims, LED low- and high-beam headlights provide improved nighttime illumination and visibility compared to contemporary high-intensity discharge (HID) headlights. Six LEDs serve as low beams and three LEDs serve as high beams on each side. Besides improving driver confidence and passive safety, the LED headlights use less energy, helping to enhance fuel efficiency by reducing engine loads. In addition, the LED headlights last up to five times longer than HID headlights and up to 10 times longer than halogen headlights - contributing to less frequent replacement and the associated cost savings. An auto on/off function is also included.
Niamh Hart Honda, 2017-10-19 15:02:32. For the first time, the new 2018 Odyssey has 1500-megapascal (MPa) ultra-high-strength steel door reinforcement beams and ultra-high-strength front door outer stiffener rings made of 1500-MPa hot-stamped steel. Laser welded and significantly stronger than ordinary steel, the ultra-high-strength steel reinforcements are designed to help better protect occupants in a frontal or side impact. Their increased strength allows the components to be made lighter which also helps reduce overall vehicle weight for improved fuel efficiency.
Shannon Griffin Honda, 2017-10-19 15:02:32. Like other Honda V6 powerplants, the Honda Odyssey engine 4-valve cylinder heads are a single-overhead-camshaft design, with the cams driven by the crankshaft via an automatically tensioned timing belt. Made of low-pressure die-cast, low-porosity aluminum, each cylinder head incorporates a "tumble port" design that improves combustion efficiency by creating a more homogeneous fuel-air mixture. An integrated exhaust manifold cast into each cylinder head reduces parts count, saves weight, improves flow and optimizes the location of the close-coupled catalyst on each cylinder bank for quick "light off."
Caitlin Duncan Honda, 2017-10-19 15:02:32. Odyssey EX, EX-L, Touring and Elite trims have bright, distinctive LED Daytime Running Lights (DRL). A signature design feature of the new Odyssey, the DRLs utilize Honda characteristic wing shape positioned below and beside the low-beam headlights. Shaped to match the modern, elegant and athletic look of the new Odyssey, the LED DRL array tapers as it moves from the body side toward the inside of the headlight lens. Stylistically, the DRLs strongly and clearly define the front corners of the Odyssey.
Eve Fitzgerald Honda, 2017-10-19 15:02:32. Located behind the instrument panel, the Honda Odyssey cast magnesium steering hanger beam replaces the multi-part steel unit in the previous Odyssey. Its purpose is as a structural attachment point for the steering column and instrument panel, as well as a structural element that helps the passenger cabin retain its shape in certain collisions. For the first time, the Odyssey body structure also utilizes composite materials to further reduce weight while enhancing rigidity and noise dampening. One example is inside the C-pillars, where composite stiffeners, together with the structural foam mentioned above help improve body rigidity. Another example is the base that supports the Odyssey battery. Created from a single composite casting, it holds the battery securely while adding minimal weight to the overall body structure, saving 2.9 lbs. over the previous Odyssey.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.