Libby Wade BMW, 2017-11-04 19:54:21. Driving Assistant Plus, also available as an option, incorporates Collision and Pedestrian Warning with City Braking function, Speed Limit Info, Proactive Driving Assistant, Active Cruise Control with Stop & Go function, and the Traffic Jam assistant, which not only maintains a safe distance to the car in front in stop-start traffic at up to 60 km/h (37 mph), but also keeps the car in lane. The system takes its cues from lane markings, the width of the road and vehicles travelling ahead. Further developed iDrive system, BMW i ConnectedDrive with navigation features and On-Street Parking Information specially developed for electric mobility.
Caitlin Duncan Honda, 2017-10-19 15:02:27. To provide extra sound insulation by blocking off hollow pillars, acoustic spray foam is applied in 14 locations in the Odyssey body for the first time in Honda history. The areas include the base of the A-, B-, C- and D-pillars, as well as the base of the windshield frame and at the top of the C- and D-pillars. In addition, acoustic tape is applied at base of the A-, B- and C-pillars, and a foam stopper is applied to the bottom of the B-pillar. Altogether, the use of these body sealing techniques results in a 55-percent reduction in body leaks, which significantly reduces noise entering the cabin in critical sections. All foam and acoustic tape application is done while the unit-body is in its just manufactured "body-in-white" form - before attachment of key components and assemblies.
Kiera Shaw Honda, 2017-10-19 15:02:27. Acoustic laminated windshield glass helps reduce noise entering the cabin on EX-L and above trims. Tuned specifically to attenuate wind-, urban- and traffic-noise frequencies, the acoustic windshield uses an outer layer of 2.0 mm safety glass, a 0.7 mm thick middle layer of acoustic polyvinyl butyral (PVB) and a 2.0 mm inner layer for a total thickness of 4.7 mm - an increase over the 4.5mm thickness of the previous-generation Honda Odyssey windshield. This helps the Odyssey place at the top of its class in wind-noise performance.
Paige Dodd Honda, 2017-10-19 15:02:27. Included on the Odyssey LX, EX, EX-L and EX-L N/R, projector-beam-style halogen headlights feature round outboard low beams and round inboard high-beam illumination. The Odyssey LX headlights have an auto-off feature to protect the battery state of charge if the driver leaves the vehicle without switching off the lights, while Odyssey EX and above trims add the convenience and safety of auto on/off high beams (AHB).
Millie Lowe Honda, 2017-10-19 15:02:28. Wraparound chrome trim adds a luxurious touch on all trims, as do chrome door handles on EX and above trims, and body-color lower side sills on the Touring and Elite trims. Re-engineering the sliding side door mechanisms removes the previous models visible rails along the rear body sides, giving the new Odyssey a cleaner appearance, while the larger 18-inch and available 19-inch wheels and tires further bolster the 2018 Odyssey athletic stance.
Caitlin Duncan Honda, 2017-10-18 23:59:56. The Honda Odyssey new direct-injection system enables increased torque across the engine full operating range along with higher fuel efficiency. The system features a compact, high-pressure, direct-injection pump that allows both high fuel flow and pulsation suppression, while variable pressure control optimizes injector operation. A multi-hole injector delivers fuel directly into each cylinder (not to the intake port, as in the previous generation Odyssey), allowing for more efficient combustion. The multi-hole injectors can create the ideal stoichiometric fuel/air mixture in the cylinders for good emissions control. Theoretically, a stoichiometric mixture has just enough air to completely burn the available fuel. Based on the operating conditions, the direct-injection system alters its function for best performance. Upon cold engine startup, fuel is injected into the cylinders on the compression stroke. This creates a weak stratified charge effect that improves engine start-up and reduces exhaust emissions before a normal operating temperature is reached.
Mollie Slater Honda, 2017-10-19 15:02:27. The Odyssey Electronic Control Unit (ECU) monitors engine functions to determine the best ignition spark timing. Two engine block-mounted acoustic detonation/knock sensors "listen" to the engine, and based on this input, the ECU can retard the ignition timing to prevent potentially damaging detonation. The engine has an ignition coil unit for each cylinder positioned within each spark plug access bore. To help improve fuel efficiency, the Odyssey Touring and Elite are equipped with Idle-Stop capability. When the system is enabled by the driver and certain operating conditions are met, the Idle-Stop system will automatically shut off the engine when the vehicle comes to a stop. The engine is automatically restarted when the driver releases the brake pedal after a stop, or if the steering wheel is turned. If the Brake Hold system is in use, the engine quickly restarts after the throttle is depressed.
Eleanor Norton Honda, 2017-10-19 00:00:12. Based on Honda global light truck platform, the 2018 Odyssey body structure has 44-percent greater torsional rigidity than the previous model. High-strength steel comprises 58 percent of the body structure, contributing to both improved stiffness and reduced mass for the unit-body. Stiffening the body with ultra-high-strength steel, hot-stamped steel and adhesives in critical areas likewise directly contribute to reduced noise and vibration, and improved ride and handling. The structural improvements also help reduce mass, directly contributing to increased fuel efficiency.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.