Niamh Hart Audi, 2017-11-04 19:54:15. Audi RS5 Coupe an emotively elegant expression. For the first time, it now has a three-dimensional form and thus creates interplay between light and shadow. quattro blisters on the flanks emphasize the pronounced bulges over the wheel arches, which have been widened by 15 millimeters (0.6 in). The widened door sills are painted in the vehicle color and also feature inserts in black or optionally carbon. The exterior mirror housings are in matt aluminum look and optionally also in carbon, in the vehicle color or in black.
Kiera Shaw Audi, 2017-10-13 19:53:03. The 2.9 TFSI V6 bi-turbo engine, which Audi developed from the ground up, offers sharp increases in power and efficiency as well as an incomparably full-bodied RS sound. It delivers 331 kW (450 hp). And it‘s peak torque of 600 Nm (442.5 lb-ft) - 170 Nm (125.4 lb-ft) more than the previous model - is available across a broad engine speed range from 1,900 to 5,000 rpm. The top model in the A5 family sprints from 0 to 100 km/h (62.1 mph) in 3.9 seconds, and reaches a top speed of 250 km/h (155.3 mph) - with the optional RS dynamic package it can even reach 280 km/h (174.0 mph).
Millie Lowe Audi, 2017-10-13 20:01:47. Each of the two turbochargers on the 2.9 TFSI is assigned to a single cylinder bank and can build up a maximum of 0.95 bar charge pressure. Like with all new V6 and V8 engines from Audi, the turbochargers are installed within the 90-degree angle of the cylinder banks, and thus the exhaust side of the cylinder heads is on the inside, while the intake side is on the outside of the engine. This layout enables compact construction and short gas flow paths with minimal flow losses - the 2.9 TFSI responds extremely spontaneously to movement of the accelerator pedal.
Mollie Slater Audi, 2017-10-13 20:05:43. The 2.9 TFSI was derived from the 3.0 TFSI used in the Audi S5. Because of the greater forces inside the engine, the valve lift has been shortened by 3 millimeters (0.1 in) to 86 millimeters (3.4 in). With its unchanged bore of 84 millimeters (3.3 in), the displacement is 2,894 cm3. The crankcase integrates thin-walled cylinder liners made of gray cast iron and the crankshaft main bearing has a 2-millimeter (0.08 in) larger diameter compared with the 3.0 TFSI.
Niamh Hart Audi, 2017-10-13 20:08:23. The chain drive uses a new concept to reduce the drive power required: the crankshaft drives the balancer shaft via gears, with the shaft lying far down in the V of the cylinder banks. From here chains run to the four camshaft sprockets. These are trioval in shape, i.e. they have a slightly triangular shape, in order to compensate for peak forces. The balancer shaft rotates on roller bearings with particularly low levels of friction.
Eleanor Norton Audi, 2017-10-13 19:56:21. Each of the two turbochargers on the 2.9 TFSI is assigned to a single cylinder bank and can build up a maximum of 0.95 bar charge pressure. Like with all new V6 and V8 engines from Audi, the turbochargers are installed within the 90-degree angle of the cylinder banks, and thus the exhaust side of the cylinder heads is on the inside, while the intake side is on the outside of the engine. This layout enables compact construction and short gas flow paths with minimal flow losses - the 2.9 TFSI responds extremely spontaneously to movement of the accelerator pedal.
Niamh Hart Audi, 2017-10-13 19:59:15. The excellent torsional rigidity of the body is the foundation for a highly precise driving response as well as for peace and quiet on board. This allows the new RS5 Coupe to be a step ahead of its competitors. Switchable engine bearings ensure comfort at idle. The new RS5 Coupe also scores top marks for passive safety. In the interior, the adaptive occupant restraint system for the front seats offers outstanding protection. It adjusts the effect of the front airbags and the seat-belt force limiters to the seating position of the driver and front passenger as well as to the type of frontal collision.
Caitlin Duncan Audi, 2017-10-13 20:03:47. The designers drew inspiration for the RS5 Coupe from the distinctive racing details of the Audi 90 quattro IMSA GTO. Massive air inlets with the honeycomb structure typical of RS models characterize the front end of the car. The Singleframe radiator grille is much wider and flatter than in the base model. Next to the headlights are additional lateral air intakes and outlets; tinted bezels differentiate the optional Matrix LED headlights. quattro blisters on the flanks emphasize the pronounced bulges over the wheel arches, which have been widened by 15 millimeters (0.6 in). As standard, these house 19-inch forged aluminum wheels, with 20-inch wheels available as an option. A sporty conclusion to the vehicle is provided by the RS-specific diffuser insert, the oval tailpipes of the RS exhaust system and a surface-mounted spoiler lip. With a length of 4,723 millimeters (185.9 in), the new Audi RS5 Coupe is 74 millimeters (2.9 in) longer than the previous model.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.