Caitlin Duncan BMW, 2017-11-04 19:54:37. On the NEDC cycle, the new BMW i3 with range extender returns combined consumption figures per 100 kilometres of 11.9 to 11.5 kWh of electric power and 0.6 litres of fuel (fuel consumption of 470.8 mpg imp; CO2 emissions: 14 -13 g/km). On the same combined NEDC cycle, the new BMW i3s with range extender consumes 12.5 kWh of electric power per 100 kilometres and 0.7 litres of fuel (fuel consumption of 403.5 mpg imp; CO2 emissions: 14 g/km). The driver assistance systems available for the new BMW i3 and BMW i3s ease the driver‘s workload and provide support in various traffic situations, as well as helping with longitudinal and lateral vehicle control. The optional Parking Assistance package includes Park Distance Control, a reversing camera and the Parking Assistant. Once a suitable parking space parallel to the road has been selected, the Parking Assistant takes control of acceleration, braking, gear selection and steering.
Paige Dodd Audi, 2017-10-13 19:43:45. The high-output V6 doesn’t just impress with its strong performance, but also with its high level of efficiency. In the NEDC, it consumes just 8.7 liters of fuel per 100 kilometers (27.0 US mpg), which corresponds to 197 grams CO2 per kilometer (317.0 g/mi). This means a 17 percent consumption saving compared with the previous model. A decisive factor in this is the new TFSI combustion process from Audi, which is known as the B-cycle. It has been specifically designed for the partial-load range, which is the predominant operating mode during normal use.
Mollie Slater Audi, 2017-10-13 19:38:08. The luggage compartment offers ten liters (0.4 cu ft) more volume than before. It now holds a best-in-segment value of 465 liters (16.4 cu ft). The tailgate opens automatically and the two-door Coupe can be ordered from Audi with optional sensor control. With this, a proximity sensor in the rear bumper reacts to a kicking motion. The tailgate unlocks and opens automatically if the optionally available advanced key is detected.
Niamh Hart Audi, 2017-10-13 19:37:52. The luggage compartment offers ten liters (0.4 cu ft) more volume than before. It now holds a best-in-segment value of 465 liters (16.4 cu ft). The tailgate opens automatically and the two-door Coupe can be ordered from Audi with optional sensor control. With this, a proximity sensor in the rear bumper reacts to a kicking motion. The tailgate unlocks and opens automatically if the optionally available advanced key is detected.
Caitlin Duncan Audi, 2017-10-13 19:47:21. The 2.9 TFSI was derived from the 3.0 TFSI used in the Audi S5. Because of the greater forces inside the engine, the valve lift has been shortened by 3 millimeters (0.1 in) to 86 millimeters (3.4 in). With its unchanged bore of 84 millimeters (3.3 in), the displacement is 2,894 cm3. The crankcase integrates thin-walled cylinder liners made of gray cast iron and the crankshaft main bearing has a 2-millimeter (0.08 in) larger diameter compared with the 3.0 TFSI.
Shannon Griffin Audi, 2017-10-13 19:40:54. In the induction tract, the intake valves close well before the piston reaches bottom dead center. This very short opening time keeps the fresh gas flow comparatively small. When the piston moves back up again after reaching bottom dead center, the compression phase starts later than usual. This allows a high geometric compression ratio of 10.0:1 - the combustion then takes place in a relatively small volume. In comparison to the short compression phase, the expansion phase is extended, which results in a high level of efficiency.
Paige Dodd Audi, 2017-10-13 19:47:59. The front strut domes are made of highly integrated cast aluminum parts. Compared to sheet steel components made of many individual parts that are welded together, they are eight kilograms (17.6 lb) lighter. This construction allows a very stiff connection between the upper links and the body for the best-possible steering response - optimal conditions for dynamic handling.
Kiera Shaw Audi, 2017-10-13 19:40:33. The chain drive uses a new concept to reduce the drive power required: the crankshaft drives the balancer shaft via gears, with the shaft lying far down in the V of the cylinder banks. From here chains run to the four camshaft sprockets. These are trioval in shape, i.e. they have a slightly triangular shape, in order to compensate for peak forces. The balancer shaft rotates on roller bearings with particularly low levels of friction.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.