Kiera Shaw BMW, 2017-11-04 19:54:23. The synchronous electric motor powering the new BMW i3 generates a maximum output of 125 kW/170 hp. Its peak torque is 250 Nm (184 lb-ft), all of which is available instantly from a standstill, as is usual with electric motors. This means that stepping on the accelerator pedal immediately unleashes a thrilling burst of speed. The motor smoothly delivers the kind of performance that drivers expect from a BMW via a single-speed automatic transmission, with continuous power delivery that builds up the car’s tempo in a characteristically dynamic fashion. 0-100 km/h (62 mph) is achieved by the new BMW i3 in 7.3 seconds. Its top speed is limited to 150 km/h (93 mph).
Paige Dodd Honda, 2017-10-19 15:02:31. Despite sharing the same wheelbase and a similar height and length with the previous generation, from the side Honda new 2018 Odyssey looks longer, lower and more athletic. Front-end features - in particular, the lighting - wrap around to the body sides more emphatically. The model characteristic Z-shaped "lightning bolt" side character lines are more strongly developed, new character lines on the doors add light contrast and visual intrigue, and a new partial black-out treatment for the D-pillar lends the appearance of the Odyssey tapered roof "floating" over the cabin greenhouse.
Mollie Slater Honda, 2017-10-19 15:02:30. For the first time, the new 2018 Odyssey has 1500-megapascal (MPa) ultra-high-strength steel door reinforcement beams and ultra-high-strength front door outer stiffener rings made of 1500-MPa hot-stamped steel. Laser welded and significantly stronger than ordinary steel, the ultra-high-strength steel reinforcements are designed to help better protect occupants in a frontal or side impact. Their increased strength allows the components to be made lighter which also helps reduce overall vehicle weight for improved fuel efficiency.
Niamh Hart Honda, 2017-10-19 15:02:30. The strength of the "tailgate ring" (the circular metal structure surrounding the tailgate) is vitally important for superior vehicle handling, stability and ride quality. Debuting on the 2016 Honda Pilot and applied to the 2018 Odyssey for the first time, this advanced tailgate ring contributes to the new model gain in torsional rigidity, benefiting ride, handling and NVH. For the first time in the Odyssey, body stiffness is enhanced using structural foam inserts in key locations. These include the left and right C-pillar stiffeners, and within an inside bracket that connects the left and right side center frames under the front floor. The improved body stiffness pays dividends in handling precision, ride quality, NVH and crash safety.
Millie Lowe Honda, 2017-10-19 15:02:30. Located behind the instrument panel, the Honda Odyssey cast magnesium steering hanger beam replaces the multi-part steel unit in the previous Odyssey. Its purpose is as a structural attachment point for the steering column and instrument panel, as well as a structural element that helps the passenger cabin retain its shape in certain collisions. For the first time, the Odyssey body structure also utilizes composite materials to further reduce weight while enhancing rigidity and noise dampening. One example is inside the C-pillars, where composite stiffeners, together with the structural foam mentioned above help improve body rigidity. Another example is the base that supports the Odyssey battery. Created from a single composite casting, it holds the battery securely while adding minimal weight to the overall body structure, saving 2.9 lbs. over the previous Odyssey.
Caitlin Duncan Honda, 2017-10-19 15:02:31. Odyssey EX, EX-L, Touring and Elite trims have bright, distinctive LED Daytime Running Lights (DRL). A signature design feature of the new Odyssey, the DRLs utilize Honda characteristic wing shape positioned below and beside the low-beam headlights. Shaped to match the modern, elegant and athletic look of the new Odyssey, the LED DRL array tapers as it moves from the body side toward the inside of the headlight lens. Stylistically, the DRLs strongly and clearly define the front corners of the Odyssey.
Libby Wade Honda, 2017-10-19 15:02:31. The Honda Odyssey new direct-injection system enables increased torque across the engine full operating range along with higher fuel efficiency. The system features a compact, high-pressure, direct-injection pump that allows both high fuel flow and pulsation suppression, while variable pressure control optimizes injector operation. A multi-hole injector delivers fuel directly into each cylinder (not to the intake port, as in the previous generation Odyssey), allowing for more efficient combustion. The multi-hole injectors can create the ideal stoichiometric fuel/air mixture in the cylinders for good emissions control. Theoretically, a stoichiometric mixture has just enough air to completely burn the available fuel. Based on the operating conditions, the direct-injection system alters its function for best performance. Upon cold engine startup, fuel is injected into the cylinders on the compression stroke. This creates a weak stratified charge effect that improves engine start-up and reduces exhaust emissions before a normal operating temperature is reached.
Libby Wade Honda, 2017-10-19 15:02:31. Compared to conventional halogen headlights, the Odyssey available LED headlights offer some 32.8 feet (10 meters) wider illuminated area on each side - as well as a 26.2 foot (8 meter) longer reach line - when low beams are in use. The width and reach advantages aid drivers in more safely and confidently navigate both straight and winding roads. Odyssey auto-high beam feature further improves safety. All 2018 Odyssey trims feature LED taillights, whose C-shaped design complements the wing-shaped design of the available front LED DRLs and providing a distinctive Odyssey appearance that is easy to spot on the road. The Odyssey EX-L, Touring and Elite trims feature a power tilting and sliding front moonroof with a manual sunshade. To tilt or slide the moonroof, the driver or front passenger needs only to fully press the ceiling-mounted switch once (instead of pressing and holding it for several seconds). The moonroof fully opens or closes automatically. However, if the operator wishes to only partially open or close the moonroof (such as to achieve partial ventilation), a lighter touch yields fully manual control. The moonroof can also tilt to provide ventilation. An auto-reverse feature is built in, helping to mitigate the possibility of a pinched finger or limb. If the moonroof motor ECU detects a threshold level of mechanical resistance, indicating a possible obstruction, the motor will automatically reverse and reopen the moonroof.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does tnahid claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.